Skip Navigational Links
LISTSERV email list manager
LISTSERV - LISTSERV.ICORS.ORG
LISTSERV Menu
Log In
Log In
LISTSERV 17.5 Help - PCBUILD Archives
LISTSERV Archives
LISTSERV Archives
Search Archives
Search Archives
Register
Register
Log In
Log In

PCBUILD Archives

Personal Computer Hardware discussion List

PCBUILD@LISTSERV.ICORS.ORG

Menu
LISTSERV Archives LISTSERV Archives
PCBUILD Home PCBUILD Home

Log In Log In
Register Register

Subscribe or Unsubscribe Subscribe or Unsubscribe

Search Archives Search Archives
Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
PCBUILD - Personal Computer Hardware discussion List <[log in to unmask]>
Subject:
Re: Keyboard Weirdness
From:
Kenneth Alan Boyd Ramsay <[log in to unmask]>
Date:
Sat, 12 Sep 1998 05:26:37 -0400
Content-Type:
TEXT/PLAIN; CHARSET=US-ASCII
MIME-Version:
1.0
Reply-To:
PCBUILD - Personal Computer Hardware discussion List <[log in to unmask]>
Parts/Attachments:
TEXT/PLAIN (38 lines)
I gather that your keyboard stops working completely, and after unplugging/
plugging it, it works again.  My vote goes to a mechanical problem.
Swapping the keyboard will settle whether the problem is a broken wire at
the plug, or in the motherboard connector.

I have seen a plug with intermittent connections, but it was fairly
obvious that someone had "wrung its neck".

I have also seen sockets encrusted with corrosion, with the connector
"pushed in", and some of the pins broken.

In the least obvious case, the problem was only visible under 10X
magnification (or higher).  The solder around the pin had suffered a
fine stress crack in a circle larger than the pin but smaller than the
hole through the board.  Touching the end of the pin with a stick was
enough to make or break the connection.  Resolder, making sure that
the joint is wetted on both sides of the board.
(Incidentally, this problem is fairly common with transformers on
boards subjected to shock or vibration.)

All of the above was observed on XT/AT type connectors.  Aside from
being more difficult to solder (because it is smaller), the same should
apply to a PS/2 connector.  Observe the usual anti-static, etc.
precautions.  This assumes that the motherboard is out of warrantee.
If it is still under warrantee, LET THE MANUFACTURER DO IT.

By the way, whatever became of all those "bad" server motherboards at
the ISP?

Boyd Ramsay

[log in to unmask]

                                  -----
       **Need help with PCBUILD mailing list? Send an Email to:**
        Bob Wright<[log in to unmask]> or Drew Dunn<[log in to unmask]>


ATOM RSS1 RSS2

LISTSERV.ICORS.ORG CataList Email List Search Powered by LISTSERV