Subject: | |
From: | |
Reply To: | |
Date: | Wed, 3 Feb 1999 13:23:30 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
On 3 Feb 99, at 21:28, jnielsen wrote:
> I found an old ega monitor, plugged it in and it started up but it
> had lost the info of the hard disk drive. So I took out the hard
> drive and could not find any info about the hard drive of what was
> the cylinder size, sectors, etc.
If you can find a manufacturer's name and model number, several people
here have ways to find the info.
> The cmos is capable of auto detecting the hard drive but have not even
> heard any post beeps, nothing so far.
From the age of the system, I wouldn't necessarily assume that the drive
is IDE. No video or beeps on boot sounds like something I've seen when a
486 motherboard wasn't configured for the right "flavour" of 486 chip, or
when a non-IDE CD-ROM drive was connected to the IDE controller.
David G
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://nospin.com/pc/pcbuild.html
|
|
|