If you have soldering skills, you may try a pair of male/female DB25
connectors for cabling, soldering them back to back, which may do some
clearance. But take into account that the porting elements will be the pins,
which is not very profesional.
************************************
Javier Vizcaino. Ability Electronics. [log in to unmask]
  Starting point:        (-1)^(-1) = -1
  Applying logarithms: (-1)*ln(-1) = ln(-1)
  Since ln(-1) <> 0, dividing:  -1 = 1     (ln(-1) is complex, but exists)


>At 08:29 AM 8/31/98 , Michael D. Sheridan wrote:
>>Folks:
>>
>>Just got a new Compaq 5030 and when I tried to put the pass through
>>for the scanner on the printer port it won't go on because they
>>have changed the case so there is not sufficient clearance as the
>>pass through is thicker than the standard printer cable end.
>>I've tried a six foot cable like an extension cord but when I connected
>>up the printer and use it a big red X covers the picture of the
>>printer when printing. It's an Epson Stylus Color 600.

                                  -----
       **Need help with PCBUILD mailing list? Send an Email to:**
        Bob Wright<[log in to unmask]> or Drew Dunn<[log in to unmask]>