Christian,
First, I think you are still on the "old" list, which has little
traffic. To get on the "new" list:
[log in to unmask]
Your first post to the list will be moderated.
Can't help with the repeater offset, but here is how to do a full reset:
Turn off the radio.
Press and hold the a=b key.
While holding in the a=b key, turn on the radio and when it comes on,
release both buttons.
To finish the reset, press the a=b key again and the radio will be reset.
If you don't press the a=b key for the second time within a few seconds,
or press any other key, the reset will abort.
There is no speech during the reset process on the TS-2000.
The above is for a full reset, which is what you want to clear out old
memory settings.
A partial reset will reset some things in the radio, but leave memories
and menus intact. For a partial reset, follow above steps, only use the
a/b key instead of the a=b key.
Good luck, enjoy your new toy, Steve KW3A
On 1/29/2019 1:57 PM, Christian wrote:
> Hi all,
>
> So, at last, now here is another ts2000 owner. Got a used radio, with the vs=
> 3 installed. But, I have a few questions.
> First, is there a way to make a factory reset of the radio? There are memory=
> channels and other settings that they have programmed it with. How do I get=
> rid of those?
> Also, a friend seem to have automatic repeater offset, but maybe it=E2=80=99=
> s because of a newer version of the radio?
> Many thanks for any help and 73!
> Christian SM0UWV=
>
|