Hi Dustin,
I should have added this.

Under General Settings there are two different boxes. One is called "Radio
ID". This is where you enter your unique DMR id number. There is another box
called "radio name". I've put my callsign in there, but you may be able to
put your name in that box also. Mine works so perhaps callsign is safest for
that one.

Cheers,
Barry.


-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Barry
Sent: Thursday, 12 November 2015 8:06 PM
To: [log in to unmask]
Subject: Re: Md380 repost

Hi Dustin.=20
It goes under general settings.=20
Barry.=20


Sent from my iPhone

> On 12 Nov 2015, at 7:35 PM, Dustin Thompson 
> <[log in to unmask]> w=
rote:
>=20
> Where do I put my DMR id=3D20
>=20
> 73 Dustin KF5VXR
>=20
>=20
>> On Nov 12, 2015, at 4:03 AM, Barry <[log in to unmask]> wrote:
>> =3D20
>> Hi Dustin,
>> It can be done, but I'm not good at explaining.
>> =3D20
>> You get into your zones list in the same way you get into your 
>> channels list. First of all you have to make sure you're in the 
>> particular zone th=
a=3D
> t
>> you want. Let's imagine you have several zones on your radio, and 
>> you've decided to call your local zone something imaginative like 
>> "Local". Once you've selected that zone, you will see a series of 
>> buttons. Most are unlabelled, but there are two called "add" and two 
>> called "delete". In between these sets of buttons you will find two 
>> list boxes, which are the=

>> key for this exersise. =3D46rom left to right as you tab, the first 
>> one i=
s
>> called "available channels". This includes a list of all of your 
>> programm=
e=3D
> d
>> channels. The next box is called "group members". This contains all 
>> of yo=
u=3D
> r
>> programmed channels which have been added to the zone already. What 
>> you w=
i=3D
> ll
>> notice is that when a channel is added to the "group members" box, it 
>> disappears from the "available channels" box.
>> =3D20
>> So let's add a channel to your zone. First you have to find it in the 
>> Available Channels list. Once you do, hit the Shift+tab key 
>> combination until JAWS says "add". Press Enter on that button, and 
>> your channel will disappear from the available box and be added to 
>> the Group Members Box.  N=
=3D
> ow
>> save, and your done.
>> =3D20
>> If I've made that sound complicated, if you want me to have a go at 
>> doing=
 i=3D
> t
>> for you, please e-mail me your codeplug and instructions about which 
>> channels you want added to which zones.
>> =3D20
>> My address is [log in to unmask]
>> =3D20
>> Cheers,
>> Barry VK6SP.
>> =3D20
>> =3D20
>> =3D20
>> -----Original Message-----
>> From: For blind ham radio operators 
>> [mailto:[log in to unmask]
]=3D
>=20
>> On Behalf Of Dustin Thompson
>> Sent: Monday, 9 November 2015 7:32 AM
>> To: [log in to unmask]
>> Subject: Md380 repost
>> =3D20
>> OK guys, hopefully this got rid of all the =3D3D
>> =3D20
>> 73 Dustin KF5VXR