Thanks Matt. This helps me a lot. Smiley. 

 Sent from my iPhone

> On Nov 10, 2015, at 1:33 PM, Matthew Chao <[log in to unmask]> wrote:
> 
> Hi, Linda.  To set PL:
> 
> 1.  Make sure the radio's PL is turned on.  If you keep pressing the 
> PL key (third button in from the left), you'll hear a series of 
> beeps.  The lowerst of the beeps means that PL is off.
> 
> 2.  When you hear the lowest tone beep, press the PL button one more 
> time, and you'll hear a higher tone.
> 
> 3.  Make sure you're in VFO mode.
> 
> 4.  find the freq you want and make sure you have the proper offsets.
> 
> 5.  Press the Function button, followed by the PL key.  (The Function 
> button is the second button in from the left).
> 
> 6.  Turn/click the far left outside knob to the right or left.  As 
> you do this, the radio will announce the PL tone on each click.
> 
> 7.  Once you get the PL you want, press the PL key again.
> 
> 8.  Press Function, select the memory channel you want, then press MR.
> 
> Hope this helps.  That's what I do from scratch.--Matt, N1IBB.
> 
> At 11:52 AM 11/10/2015, you wrote:
>> Hi all,
>> 
>> could someone Pretty please refresh my memory on how to set the pl tone on a=
>> frequency as I've not done it in a while and there has been so much going o=
>> n here.
>> 
>> I get confused as to which button is which.=20
>> 
>> My husband  had completed his first round of chemo and radiation for Stage I=
>> II lung cancer.
>> 
>> Now we will have a PET scan in less than 2 weeks and then maintenance chemot=
>> herapy.=20
>> 
>> Thanks for any help.
>> 
>> 
>> Sent from my iPhone=Thanks Matt. this helpsl lots. Smiley.