Enter the repeater output frequency, such as 147060.
Press "Menu", "2", "6", "Menu". The radio will say "Offset frequency".
For 2 meter repeaters, enter 00600. For 70 cm repeaters in the US or Canada,
press 05000.
Press "Menu" to confirm the offset amount. The radio will say "Confirm".
Press "Menu", "2", "5", "Menu".
Press "1" for a plus (positive) offset, or "2" for a minus (Negative)
offset, then press "Menu". The radio will say "Confirm".
Set the CTCSS or DCS codes for transmit and receive, as appropriate. These
are in menus 11 and 12 for CTCSS and DCS receive respectively, and menus 13
and 14 for CTCSS and DCS transmit. CTCSS tones can be entered directly; for
instance, enter 885 for an 88.5 Hz tone, 1318 for a 131.8 tone.
Press menu to confirm.
Thanks to Buddy for these instructions, they are spot on.
73 N2DYN Angelo
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Roy Nickelson
Sent: Saturday, December 03, 2016 6:58 PM
To: [log in to unmask]
Subject: Re: Baofeng HT
Go to BFO
Enter the frequency.
Go to menu 26 radio says offset frequency. Enter 00600 press menu radio
beeps I would expect it to say confirmed.
The menus seem to be the same.
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Buddy Brannan
Sent: Saturday, December 3, 2016 5:06 PM
To: [log in to unmask]
Subject: Re: Baofeng HT
Please outline the steps you're using to program in the frequency. Maybe =
they changed the menus? My UV5R is now several years old. Do I need a =
UV5X3, you know, for science?=20
--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194=20
Mobile: 814-431-0962
Email: [log in to unmask]
> On Dec 3, 2016, at 4:59 PM, Roy Nickelson <[log in to unmask]> =
wrote:
>=20
> When trying to set the offset frequency to 00600 all I get is a single
>=
beep.
> What could be the issue?
> I am in frequency mode. I enter 145.470 and then go to menu 26 and =
enter
> 00600 for the offset frequency and get a single beep according to the
> instructions the radio should say confirmed at this point.
> Note I am trying to get a local repeater to work in bfo (frequency =
mode)
> before I try programming memories.
> Roy AI4GO
>=20
>=20
> -----Original Message-----
> From: For blind ham radio operators =
[mailto:[log in to unmask]]
> On Behalf Of Buddy Brannan
> Sent: Wednesday, November 30, 2016 9:21 PM
> To: [log in to unmask]
> Subject: Re: Baofeng HT
>=20
> That's because the Baofeng software is garbage.
>=20
> Your TH-G71 cable won't work. It wants a Kenwood style HT cable. You =
can =3D
> get one with an FTDI chip fro Baofeng Tech, and that will work =
great.=3D20
>=20
> Chirp will work, if you're willing to use your JAWS cursor or mouse
>=3D pointer and learn some hot keys. It will work even better if
>you're =3D willing to learn to export to a CSV file and edit that in
>Excel, then =
=3D
> import the CSV back into Chirp.=3D20
>=20
> Your other option is to buy the package from RT Systems, which comes
>=3D=
with
> the correct cable. It works great with NVDA and does not work great
> =3D =
with
> anything else. It's also $49.95.=3D20
>=20
> --
> Buddy Brannan, KB5ELV - Erie, PA
> Phone: 814-860-3194=3D20
> Mobile: 814-431-0962
> Email: [log in to unmask]
>=20
>=20
>=20
>=20
>> On Nov 30, 2016, at 9:12 PM, Roy Nickelson <[log in to unmask]>
>> =3D
> wrote:
>> =3D20
>> So I did purchase one of these uv5r radios but have not received it
>> =3D=
> yet.
>> Is there any information on the programming software for windows?
>> I am hoping my programming cable for my kenwood thg-71a will work =
with=20
>> =3D
> the
>> uv5r=3D20
>> The software and where to obtain it was not mentioned in the below
>> =3D
> document.
>> Roy
>> =3D20
>> -----Original Message-----
>> From: For blind ham radio operators =3D
> [mailto:[log in to unmask]]
>> On Behalf Of Buddy Brannan
>> Sent: Wednesday, November 23, 2016 3:16 PM
>> To: [log in to unmask]
>> Subject: Re: Baofeng HT
>> =3D20
>> Only this rotten thing:
>> http://buddy.brannan.name/eyes-free/baofeng-uv5r-eyes-free.rtf
>> =3D20
>> =3D20
>> --
>> Buddy Brannan, KB5ELV - Erie, PA
>> Phone: 814-860-3194=3D3D20
>> Mobile: 814-431-0962
>> Email: [log in to unmask]
>> =3D20
>> =3D20
>> =3D20
>> =3D20
>>> On Nov 23, 2016, at 3:13 PM, Roy Nickelson
>>> <[log in to unmask]>=20=
>>> =3D3D
>> wrote:
>>> =3D3D20
>>> Is there documentation on line?
>>> Roy
>>> AI4GO
>>> =3D3D20
>>> Sent from my iPhone
>>> =3D3D20
>>>> On Nov 23, 2016, at 3:04 PM, Buddy Brannan <[log in to unmask]>
>>>> =3D3D=
>> wrote:
>>>> =3D3D3D20
>>>> It's probably like all the other UV5R an variants, which is
>>>> pretty=20=
>>>> =3D3D=3D
>=20
>> =3D3D3D3D
>>>> accessible.=3D3D3D3D20
>>>> =3D3D3D20
>>>> --
>>>> Buddy Brannan, KB5ELV - Erie, PA
>>>> Phone: 814-860-3194=3D3D3D3D20
>>>> Mobile: 814-431-0962
>>>> Email: [log in to unmask]
>>>> =3D3D3D20
>>>> =3D3D3D20
>>>> =3D3D3D20
>>>> =3D3D3D20
>>>>> On Nov 23, 2016, at 11:28 AM, Roy Nickelson =
<[log in to unmask]>=20
>>>>> =3D
> =3D3D
>> =3D3D3D3D
>>>> wrote:
>>>>> =3D3D3D3D20
>>>>> Does anyone know about the accessibility of these radios? I am =3D
> =3D3D3D3D
>>>> interested in=3D3D3D3D3D
>>>>> the Daytona or the -5r
>>>>>> =3D3D3D3D3D20
>>>>>> =3D3D3D3D3D20
>>>>>> http://www.mtcradio.com/baofeng-daytona-dual-band-5w-ht/
>>>>>> =3D3D3D3D3D20
>>>>> Roy
>>>>> AI4GO
>>>>>> Visual Link Spam Filter
>>>>>> Mark as Spam
>>>> =3D3D3D20
>>>> =3D3D3D20
>>>> --=3D3D3D20
>>>> =3D3D3D20
>> =3D20
>> =3D20
>> --=3D20
>=20
>=20
> --
--
BEGIN-ANTISPAM-VOTING-LINKS
------------------------------------------------------
----
Visual Link Spam Filter
Mark this messages as spam:
https://antispam.roaringpenguin.com/canit/b.php?i=01Sfy68V4&m=9111662241b8&t
=20161203&c=s
------------------------------------------------------
END-ANTISPAM-VOTING-LINKS
|
