Hi, Steve. Thanks. Will be looking for PSK and follow your
suggestions. Besides opening up the filter and turning on Menu 45,
is there anything else I need to do on my 480?
Also, will mmtty do psk, and are there any settings I need to change
for that to work? I also have digipan and have same questions about
that one as well. Can digipan do RTTY? Thanks.--Matt.
At 01:09 PM 7/19/2015 -0400, you wrote:
> Matt,
>
> Glad you got something working. The wav files are nice, but you
>will have to start tuning in real signals.
>
> Not sure how much monkeying around with the screen will help.
>Tinker if you want, you can always untinker later.
>
>The left knob is TX audio and the middle knob is RX audio. You might
>want to try increasing the TX (left knob) and decrease the VOX (right
>knob) and see if you can get the radio to key.
>
>You can hear PSK on 20 meters anytime the band is open, between 14.070
>and 14.073 If you are on 14.070 use USB mode, if on 14.073 use LSB mode.
>
>
>Open the filter in the radio to 3 khz. The psk software will grab all
>the signals in that 3 khz for decoding.
>
>Have fun, Steve KW3A
>
>
>On 7/19/2015 12:27 PM, Matthew Chao wrote:
> > Ok, Steve, we got receive back. Readjusted everything according to
> > instructions. Also under the sl/usb codec speaker settings, changed
> > freq response to 11025. ARan test again, and it's reading the files.
> >
> > Does it help if I size the creen by character width and line height
> > under mtty? Also, anywhere I can get sounds of PSK31 so as to know
> > what to listen for?
> >
> > Also, which knobs on the signallink do what? Far right is
> > vox? Other two knobs set pointing straight up.
> >
> > Oh, no smoke yet - but wait ... there's more!--Matt, N1IBB.
> >
> > t 09:06 AM 7/19/2015 -0400, you wrote:
> >> Matt,
> >>
> >> Too much junk in RTTY is usually to much drive to the sound card. The
> >> RTTY contests are over and it will be harder to find a signal on the
> >> air to decode. On to PSK!.
> >>
> >> You're jumping back and forth between RX and TX and don't seem to have a
> >> handle on either one.
> >>
> >> When you transmit and hear tones, are they coming from the radio, or
> >> the pc's speakers?
> >>
> >> If from the radio (tones from radio, but not going into TX) it's a
> >> vox/tx drive issue. If the tones are coming out of the pc's speakers,
> >> I think you may not have the right sound card selected and are trying
> >> to transmit on the pc's sound card.
> >>
> >> The fact that you saw some call signs yesterday, would lead me to think
> >> you are at least hooked up correctly, with the mini din plugged into the
> >> center jack of the 3 behind the little cover. It's a snug fit. Are you
> >> sure it is plugged in firmly? On mine, the little notch on the metal
> >> barrel of the plug is at the 12 o'clock position.
> >>
> >> Don't worry, it's all just a bad dream.
> >>
> >> 73, Steve KW3A
> >> On 7/19/2015 8:44 AM, Matthew Chao wrote:
> >>> No smoking or zapping sounds yet. Adjusted the volume, and now, I'm
> >>> getting garbled characters. Probably should have left well enough
> >>> alone, but had to tinker, hi. Does that mean the volume's now too
> >>> low?--Matt, N1IBB.
> >>>
> >>> At 10:37 PM 7/18/2015 -0400, you wrote:
> >>>> Hi Matt,
> >>>>
> >>>> Been playing in the contest. I did see John responded to your other
> >>>> posts. He said the same thing I had mentioned, that you need to follow
> >>>> the instructions for what levels to set within Windows for the SL's
> >>>> sound card
> >>>>
> >>>> The "overflow" message means too much drive for the sound card. So
> >>>> you should lower the level on the RX drive knob.
> >>>>
> >>>> On a previous question:
> >>>>
> >>>> I don't think there is a hot key to get to the RX window. This is
> >>>> where you and your screen reader become fast friends.
> >>>>
> >>>> Don't worry. Next week you get to tackle PSK.
> >>>>
> >>>>
> >>>> If you smell smoke, pull the plug and run.
> >>>>
> >>>> 73, Steve KW3A
> >>>>
> >>>> On 7/18/2015 10:24 PM, Matthew Chao wrote:
> >>>>> Hi, Folks. Somehow, I messed up my MMTTY settings. When I run the
> >>>>> test files, I get overflow, and no text. Is the mic volume on my SL
> >>>>> USB too high? What happened? Thanks.--Matt, n1ibb.
> >>>>>
> >>>>>
> >>>>>
> >>>
> >>>
> >>>
> >
> >
> >
|