BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG
Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: TM-V71A setting offset freq
From:
Kent Plemmons <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Tue, 26 May 2015 21:24:07 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (76 lines) 
Thank you Gale.  Although I looked in my manual, either I overlooked the
information you have provided or I was looking at the wrong place!
This is exactly what I need, thank you VERY much.

Kent Plemmons, KK4FFF


-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Gale Conard
Sent: Tuesday, May 26, 2015 6:08 PM
To: [log in to unmask]
Subject: Re: TM-V71A setting offset freq

Kent:

I copied this from the operators' manual for the TMV-71A.  I hope it helps.


STORING ODD-SPLIT REPEATER FREQUENCIES
Some repeaters use a receive and transmit frequency pair with a non-standard
offset. To access those repeaters, store two separate frequencies in a
memory channel. You can then operate on those repeaters without changing the
offset frequency you stored in the menu.
1 Set up a simplex channel by following steps 1 to 6 of "STORING SIMPLEX AND
STANDARD REPEATER FREQUENCIES", above.
2 Press [VFO] to enter VFO mode.
3 Rotate the Tuning control to select your desired transmit frequency.
. Additionally, you can press the microphone [UP]/[DWN] keys to select a
frequency.
4 Set up any additional data desired for the transmit frequency.
. Tone ON/OFF, Tone frequency, CTCSS ON/OFF, CTCSS frequency, DCS ON/OFF,
DCS code, etc.
5 Press [F].
. A memory channel number appears.
6 Rotate the Tuning control to select your desired channel number.
. Additionally, you can press the microphone [UP]/[DWN] keys to select a
channel.
7 Press [PTT], [MR] to store the data in the selected Memory channel.



73,
Gale
[log in to unmask]
----- Original Message -----
From: "Kent Plemmons" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, May 26, 2015 10:49 AM
Subject: TM-V71A setting offset freq


Hi List,



Can anyone tell me how to set an offset frequency of 0.990MHz on my TM-V71A?

My receive freq is 146.775 and my transmit freq needs to be 147.765.

When I go to menu #400 to select an offset value, it appears that all of the
available offset values are in multiples of 0.05MHz.



There must be another way to do this using the radio but I haven't run
across the solution yet.



Thanks

Kent Plemmons

Clyde NC KK4FFF

ATOM RSS1 RSS2