Sender: |
|
Date: |
Fri, 23 Jan 2009 10:36:14 -0800 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
In-Reply-To: |
|
Content-Type: |
text/plain; charset=ISO-8859-1; format=flowed |
From: |
|
Parts/Attachments: |
|
|
Diane,
Try to make sure they support "SDHC". If they are that cheap they might not.
-Pete
Diane wrote:
> Pete,
>
> I found usb card readers on ebay for under $3 with free shipping. So that's
> what I'm going to do. They look like thumb drives.
>
> Diane
>
> On Thu, Jan 22, 2009 at 1:56 PM, Pete B. <[log in to unmask]> wrote:
>
>
>> Diane,
>> Also check to see if the card is marked "HC"...High Capacity. These cards
>> are also not supported by the older SD card readers, but most new ones will.
>> -Pete
>>
>>
>>
>> Diane wrote:
>>
>>
>>> The card is trying to be used in an HP computer. It's 4GB and the highest
>>> it's read is 2GB. I checked their web site and there might be a limit.
>>> It
>>> works on my newer computer with Vista. It wasn't seen when I plugged in
>>> the
>>> mp3 player with the card inside. So I need to get a usb card reader.
>>> Will
>>> any do?
>>>
>>> Diane
>>>
>>> On Thu, Jan 22, 2009 at 8:35 AM, Hachmeyer, Mr. Paul S. <
>>> [log in to unmask]
>>>
>>>
>>>
>>>> wrote:
>>>>
>>>>
>>>>
>>>
>>>
>>>> Be careful if you decide to format the card. If the card is for camera
>>>> use, only delete files and format it in the camera. I have a couple
>>>> cards
>>>> that were formatted in a pc that will not work in a camera because the
>>>> format is different. They can sometimes be fixed with a hex editor, but
>>>> it
>>>> is a pain. Have you tried it in a camera?
>>>> Paul Hachmeyer
>>>> ________________________________________
>>>> From: Personal Computer Hardware discussion List [
>>>> [log in to unmask]] On Behalf Of Diane [[log in to unmask]]
>>>> Sent: Friday, January 16, 2009 6:21 PM
>>>> To: [log in to unmask]
>>>> Subject: [PCBUILD] MIcro Card
>>>>
>>>> Dear Listers,
>>>>
>>>> I just bought a new Sandisk 4GB micro card on Ebay. I get an error
>>>> message
>>>> when I put it in my card reader:
>>>>
>>>> "L :\is not accessible. The request could not be performed because of an
>>>> I/O device error."
>>>>
>>>> I thought maybe it needs to be formatted. But I've never had to format a
>>>> micro card before.
>>>>
>>>> Running XP2
>>>>
>>>> Diane Kroeckel
>>>>
>>>>
>>>> Do you want to signoff PCBUILD or just change to
>>>> Digest mode - visit our web site:
>>>> http://freepctech.com/pcbuild.shtml
>>>>
>>>>
>>>>
>>>>
>>>>
>>> Do you want to signoff PCBUILD or just change to
>>> Digest mode - visit our web site:
>>> http://freepctech.com/pcbuild.shtml
>>> ------------------------------------------------------------------------
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - http://www.avg.com Version: 8.0.176 / Virus Database:
>>> 270.10.12/1909 - Release Date: 1/22/2009 7:08 AM
>>>
>>>
>>>
>>>
>> Do you want to signoff PCBUILD or just change to
>> Digest mode - visit our web site:
>> http://freepctech.com/pcbuild.shtml
>>
>>
>>
>
> The NOSPIN Group is now offering Free PC Tech
> support at our newest website:
> http://freepctech.com
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.176 / Virus Database: 270.10.12/1911 - Release Date: 1/23/2009 7:28 AM
>
>
The NOSPIN Group is now offering Free PC Tech
support at our newest website:
http://freepctech.com
|
|
|