Nor have I, and I've set up several repeaters in memories.

Steve

----- Original Message ----- 
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: January 27, 2015 11:36
Subject: Re: TS2000 info please


>I can't say I've ever seen that bug before with mine.
> ----- Original Message ----- 
> From: "Richard B McDonald" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, January 27, 2015 11:26 AM
> Subject: Re: TS2000 info please
>
>
>> Hi Junior!
>>
>> I notice this as well.  I use JJRadio.  I notice that, when in VFO mode
>> for
>> either 2M or 70 cm, if I transfer that VFO to a memory the offset does 
>> not
>> carry-over.  Put another way, when in a 2M or 70 cm frequency with all 
>> the
>> offsets, PL tone and so on properly set, sometimes these settings do not
>> carry-over into a memory.
>>
>> I think that this is a TS-2000 bug.  For whatever reason, even when only
>> using the rig itself without using any sort of control software, the
>> offset
>> direction and offset itself do not carry-over into the memory.  The
>> problem
>> that this causes is that when you then select that memory, with it's
>> offset
>> direction and offset being "none" and "0", this overrides the TS-2000's
>> defaulted offset directions and offsets for both 2M and 70 cm. 
>> Therefore,
>> the result is simplex.  So, for a 2M and 70 cm memory, the offset
>> direction
>> and offset must be appropriately set in the memory.
>>
>> To fix this, in JJRadio I review the memory settings for the transferred
>> frequency.  There, I then ensure that the correct offset direction,
>> offset,
>> PL tone and so on are correct.  This process works flawlessly.
>>
>> 73,
>> Richard KK6MRH
>>
>> -----Original Message-----
>> From: For blind ham radio operators 
>> [mailto:[log in to unmask]]
>> On Behalf Of Junior Lolley
>> Sent: Monday, January 26, 2015 12:37 PM
>> To: [log in to unmask]
>> Subject: TS2000 info please
>>
>> I am trying to put in a 2 meter freq into the ts2000 with no joy.
>> I enter the freq and the tone but when I enter it into the memory it
>> doesn't
>> do the 600 up.
>> It just stays as a simplex freq.
>> I have checked everything I can think of and all looks good.
>> I was wondering if anyone has any suggestions.
>> It does this on 2 meters and the 440 band also.
>> Thanks in advance.
>>
>>
>> Junior Lolley kg4itd
>> Liberty County Emergency Coordinator
>> "The 3 C's of life: choices, chances, and changes. You must make a choice
>> to
>> take a chance or your life will never change."
>>
>>
>>
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2015.0.5315 / Virus Database: 4273/9004 - Release Date: 01/26/15
>>