Thanks, but their isn't any comport to reset the number to.
I think I will try the proceedure with out the USB keyboard and see how it
goes.
Then I'll try it on another computer.
I think I will wait until after Passover Seder, which is today, and kind of
like Thanksgiving, but the 4 cups of wine are prescribed.
Its in the book.
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Steve Forst
Sent: Friday, April 03, 2015 5:50 AM
To: [log in to unmask]
Subject: Re: mating
On my Windows 7 desktop in Device Manager, under"ports comm and LPT" it
shows as "Silicone Labs CP210X USB to UART Bridge (com 2)".
I think Tom KB8TYJ had problems installing this software on a notebook
pc some time ago.
You could always try running the software and keep resetting the comm
port to a higher number in the software and see if it connects.
If I remember right, they recommend connecting direct to a "real"
USB port on the computer and not through a hub.
The software will work fine on a USB to serial adapter connected to the
serial port on the radio. The radio's serial and comm ports are
independent of each other and you can actually run 2 programs at the
same time.
Do you see the USB audio device listed in the Windows audio devices?
When you turnd DC power to the radio either onn or off, do you hear
the Windows sound that means a USB device has connected or disconnected?
Also, while I think the software is the same for both models, did you
get the comm driver listed under the correct model for your radio,
either 590s, or 590sg?
73, Steve KW3A
On 4/3/2015 2:09 AM, howard kaufman wrote:
> Well, I am trying to use my netbook as a shack computer.
>
> When I run the virtual comport software nothing happens.
>
> It says it is successful and you may now connect your radio, but when I
look
> in device manager, I see only two bluetooth comports.
>
> When I uninstall them and run the software no virtual com port.
>
> When I reboot the computer, the bluetooth comports are back, but no
virtual
> comport.
>
> I tried it with the radio disconnected like it says, I tried with the
radio
> connected like it doesn't says.
>
> I am beginning to wonder if since this little netbook only has two USB
> ports, maybe it can't be done?
>
> Maybe it has to be done with out a usb keyboard pluged in to the netbook?
>
> Any ideas are appreciated.
>
> By the way, this arcp590 software looks like it is fully usable so far.
>
> I have no idea about the remote software, we are a long way from there.
>
> I can't naturally get n3fjp to get the band and mode data from the radio.
>
>
>
>
>
> Howard Kaufman MSW LCSW
>
>
>
>
>
|