Subject: | |
From: | |
Reply To: | |
Date: | Thu, 5 Feb 2015 15:24:59 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Remember that AGC must be on for the S-meter to work. I kthink
someone indicated that there are separate settings for SSB and CW,
but I'm not sure of that. At any rate it's worth checking to make
sure AGC is on when on SSB.
At 11:25 AM 2/5/2015, you wrote:
>Seems like you would get SWR readings if you push the lower left
>button in the top left group of eight buttons, no matter what
>mode you are in. Jim WA6EKS
>
> ----- Original Message -----
>From: Steve Forst <[log in to unmask]
>To: [log in to unmask]
>Date sent: Thu, 5 Feb 2015 07:56:57 -0500
>Subject: Re: Discovery after upgrading the Ts590:
>
>Mike,
>
>Although I did the recent update at the high rate via the USB
>connection, most of the stuff I run is via the serial port at
>9600 and
>no problems.
>
>The SWR will read in SSB. Be sure you are putting some solid
>audio
>into the mic. Of course it is just as easy to check SWR in CW
>or FSK mode.
>
>Toggle the meter button until it says "R" to read SWR.
>
>73, Steve KW3A
>
>On 2/5/2015 7:32 AM, Mike wrote:
> The SWR butten talks only in the CW position.
> The upgrade went fairly easy. I had to change my baud rate, it
>didn't
> list 9600 so I changed it, then I changed it back.
> I do have a question, Would it be better if I used a faster baud
>rate?
> Thanks.
> Mike
> KD2CDU
|
|
|