Mike,
Although I did the recent update at the high rate via the USB
connection, most of the stuff I run is via the serial port at 9600 and
no problems.
The SWR will read in SSB. Be sure you are putting some solid audio
into the mic. Of course it is just as easy to check SWR in CW or FSK mode.
Toggle the meter button until it says "R" to read SWR.
73, Steve KW3A
On 2/5/2015 7:32 AM, Mike wrote:
> The SWR butten talks only in the CW position.
> The upgrade went fairly easy. I had to change my baud rate, it didn't
> list 9600 so I changed it, then I changed it back.
> I do have a question, Would it be better if I used a faster baud rate?
> Thanks.
> Mike
> KD2CDU
>
>
>