It does, but I think it only works in AM.  In other modes, the amount of carrier is controlled by the Power setting.

Steve

----- Original Message ----- 
From: "Butch Bussen" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, September 11, 2014 14:07
Subject: Re: TS-2000 not putting out full power.


> I'd havde to look at the manual, but doesn't that radio ahve a carier 
> control that would control power?
> 73
> Butch
> WA0VJR
> Node 3148
> Wallace, ks.
> 
> 
> BTW, my tw1 isn't that bad, but not all that accurate, I've seen it read 
> 80 percent or so of acgtual power and that is checking against a byrd 
> and a service monitor.  Still, half is a bit much I think.
> 
> 73
> Butch
> WA0VJR
> Node 3148
> Wallace, ks.
> 
> 
> On Thu, 11 Sep 
> 2014, John Miller wrote:
> 
>> Come on now, it's a lot more accurate than that and anyone who says other
>> wise doesn't have a clue what they're talking about. It may not be 100%
>> accurate but it's very close.
>> ----- Original Message -----
>> From: "Ed Malmgren" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Thursday, September 11, 2014 11:23 AM
>> Subject: Re: TS-2000 not putting out full power.
>>
>>
>>> You need to check it with another meter.  I have heard the meter your
>>> using
>>> is not very accurate.  73
>>>
>>>
>>>
>>> ED K7UC
>>> -----Original Message-----
>>> From: Rick
>>> Sent: Thursday, September 11, 2014 9:11 AM
>>> To: [log in to unmask]
>>> Subject: TS-2000 not putting out full power.
>>>
>>> Hi list.
>>>
>>> According to my TW1 my TS-2000 is only putting out 55 watts on all the HF
>>> bands.
>>>
>>> It is also showing swr less than 1.5 average on all the bands.
>>>
>>> I have the internal tuner turned off, with it on it shows 52 watts.
>>>
>>> Is there something that could be causing low output power, or do I need to
>>> send my radio for repairs?
>>>
>>> Thanks in advance for any help, and 7 3.
>>
>>
>