Oh, I already have!
You have to do what you can to preserve domestic tranquility, especially
when you learn from each other!!
Tom Behler: KB8TYJ
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Lowell Miller
Sent: Saturday, October 25, 2014 9:20 AM
To: [log in to unmask]
Subject: Re: Best procedure for connecting and disconnecting a 12-volt
battery
Yes! Tom, I will give you an A for the day, and don't forget to praise your
XYL for her smarts!
Best 73.
Lowell W8QIY
----- Original Message -----
From: "Tom Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, October 24, 2014 9:49 PM
Subject: Re: Best procedure for connecting and disconnecting a 12-volt
battery
> Oh, I know, Lowell.
>
> This is why I went with her intuition and possibly somewhat more
> informed approach.
>
> It does now seem like sort of a consensus is emerging in favor of her
> view, which supports being on the totally safe side, especially when
> working with a vehicle battery.
>
> So, if I'm reading the consensus correctly it goes like this:
>
> When connecting the battery, connect the positive first, and then the
> negative.
>
> When disconnecting, disconnect the negative first, followed by the
> positive.
>
> Do I get an A. for the day?
>
> Tom Behler: KB8TYJ
>
>
> -----Original Message-----
> From: For blind ham radio operators
> [mailto:[log in to unmask]]
> On Behalf Of Lowell Miller
> Sent: Friday, October 24, 2014 8:00 PM
> To: [log in to unmask]
> Subject: Re: Best procedure for connecting and disconnecting a 12-volt
> battery
>
> Tom, I am not sure which is the most scientific, but I have always
> have done as your wife has suggested.
> Now I know I am in trouble with you but wives are often right!
> 73
> Lowell W8QIY
> ----- Original Message -----
> From: "Tom Behler" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, October 24, 2014 4:37 PM
> Subject: Best procedure for connecting and disconnecting a 12-volt
> battery
>
>
>> Hi, all.
>>
>>
>>
>> I am sure that, to some, this question might seem to be very
>> elementary, especially for someone like me who holds an Extra class
>> license. So, please bare with me, and understand why I am asking the
>> question. As a college professor, I always try to teach my students
>> not to simply memorize procedures or concepts just for the sake of
>> doing so. I tell them that real learning involves understanding the
>> procedures and/or concepts and the reasons behind them. I also
>> stress that true learning involves being able to apply what you have
>> learned to real life situations.
>>
>>
>>
>> Anyway, here's my question:
>>
>>
>>
>> Earlier this afternoon, my XYL and I were in the process of getting
>> our summer camping trailer winterized for the season, and taken to a
>> local facility for winter storage. As we worked, it came time to
>> disconnect the house battery from the unit, so that it can be put on
>> a trickle charger during the winter months.
>>
>>
>>
>> Before we disconnected the battery, we were discussing the best
>> and/or safest procedure for doing so. We never worried about this
>> with the drivable RV we used to have, because it was always kept in
>> our driveway and plugged into our main house power all winter.
>>
>>
>>
>> Anyway, my proposed approach was this:
>>
>>
>>
>> When disconnecting the battery, disconnect the positive side first,
>> and then the negative. The idea here is that you always have the
>> negative or ground connected when you're working with the battery.
>>
>>
>>
>> When re-connecting the battery, I proposed connecting the ground
>> terminal first, once again, to give you a ground to start from, and
>> then connect the positive terminal last.
>>
>>
>>
>> My XYL's approach was the opposite:
>>
>>
>>
>> She argued that when disconnecting the battery, disconnect the
>> negative terminal first, and then the positive. . When connecting,
>> connect the positive first, and then the negative.
>>
>>
>>
>> As a smart person who has much faith in my XYL's judgment, I decided
>> to go along with her proposed approach, and happily, we are both
>> still here to talk about it.
>>
>>
>>
>> However, I know that I have connected and disconnected many a battery
>> using my initial approach, and I've survived that as well. Perhaps I
>> just got lucky, but I always thought I was proceeding with care, and
>> with the correct procedure.
>>
>>
>>
>> Once again, I hope nobody minds this question, but I consider
>> everyone here to be knowledgeable on many things, and I trust that
>> you will all be able to go with the idea that the only stupid
>> question is a question that goes un-asked.
>>
>>
>>
>> Your wisdom on the topic would be most appreciated.
>>
>>
>>
>> Thanks for listening.
>>
>>
>>
>> Tom Behler: KB8TYJ
>>
>>
>>
>>
>>
>>
|
