Hello Bob,
The Yaesu G800DXA is a very small rotor. I would not use it on any yagi
with a boom of over 15 feet, and a weight of in excess of maybe 75 pounds.
Remember that Yaesu rotors do not have a break of any kind. Yaesu rotors
use a jack screw to turn the antenna, and since you can't turn a work
drive/jack screw backwards, the mechanism itself acts as a brake. If you
put too much of a load on a rotor of this type, you run the risk of ripping
the guts out of the rotor pronto.
I suggest that you buy at least the G1000 which is heavier than the G800. I
currently use the Yaesu G2800DXA to turn my DB-36, Yaesu's largest rotor,
and mine broke Friday morning and will likely have to be scrapped.
Good luck.
73
Alan R. Downing
Phoenix, AZ
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Steve Forst
Sent: Monday, August 25, 2014 3:17 PM
To: [log in to unmask]
Subject: Re: Rotter
It's considered a medium duty rotor. I plan to use mine to turn 27
pounds of fiberglass on a push up mast. I think if I were doing your
project, I would go a lot bigger. More money, but more piece of mind.
73, Steve KW3A
On 8/25/2014 5:51 PM, Robert Ringwald wrote:
> I live in an historical part of town. I=E2=80=99d have to jump through =
> all sorts of hoops in order to put up a tower over 40 feet. I am down in =
> a ravine so would like to get the beam up higher than 40 feet.=20
>
> There is geology report, building permits, etc.=20
>
> However, I have a 150 foot pine tree I could cut down a ways and put a =
> beam on it.=20
>
> I would have to hire a tree climber. I know a couple pros.=20
>
> I have an ex iron worker ham who is good at putting up antennas. =
> We=E2=80=99d have to work out the details as to building and testing it =
> on the ground and getting it up there in tact, or putting it together on =
> top of the tree.=20
>
> I do not want to get a puny rotator that will break down and cause me to =
> have to get another tree climber and all the related problems that would =
> insue.=20
>
> My question is would the Yaesu. G-800DXA be suitable, strong enough and =
> reliable enough?
>
> I do not intend to get too large of a beam.=20
>
> -Bob Ringwald K6YBV
> =20
> -Bob Ringwald K6YBV
> www.ringwald.com
> 916/ 806-9551
>
> =E2=80=9CDon't worry about avoiding temptation. As you grow older, it =
> will avoid you.=E2=80=9D
> - Winston Churchill
>
>
>
|