Mike,
This is the one I am thinking about. I would probably scrap the top
section and put the rotor on the next one which is 1.5 inches.
Bottom section is 2.25 od, then 2 inches , then 1.75, 1.5, and the 1.25
at the top.
This one is cut down to ship UPS and about 8 feet overall length.
I've seen it cheaper, but with shipping it comes out the same as DXE.
Total wweight is 34 lbs., so things get heavy as you push up the lower
sections: Weight of mast, rotor, antenna, control cable and coax,
guys, etc. Eat your Wheaties (or Wheata Bix, or whatever you have up
there).
73, Steve KW3A
On 8/27/2014 2:59 PM, Michael Ryan wrote:
> Hey all:=20
>
> DX Engineering sells the Rohn 9H50 Telescoping mast for 149.99.=20
> It telescopes to 34.15 feet and is a 5 section mast. The top section is =
> 1.25 so I'm guessing that might be a little small to put a rotator on =
> but I'm sure you could extend it up to 3 or 4 sections, put a rotator on =
> that, then put a short mast holding the Hex on the rotator.=20
> I think me and my XYL could manage this quite easily and its something =
> I'm going to consider over the winter and hopefully save up for.=20
>
> 73:=20
> Mike VO1AX=20
>
>
>
|