Hi Tom,

I looked up the com port the usb is using in device manager, which 
was com5, and set the N3FJP software to use that.



At 10:30 AM 3/21/2014, you wrote:
>Dave:
>
>I remember having the same problem with my Winkeyer initially, when trying
>to get it to work with the N3FJP logging software.
>
>In fact, I had to get the assistance of my sighted XYL to resolve the  port
>selection issue.
>
>As I'm sure you probably know, there is a set of instructions that comes
>with the Winkeyer for setting it up with Windows, so if you follow those
>instructions, perhaps with the help of someone who can look at the screen to
>be sure you know what is happening, it will eventually work.
>
>I just wish I could remember what my specific problem was, but I know it was
>something along the lines of port selection and verification.
>
>If you continue to have problems, please let me know, and I'll ask my XYL to
>help me  remember what the initial problem was, and how we solved it.
>
>Tom Behler: KB8TYJ
>
>
>-----Original Message-----
>From: For blind ham radio operators [mailto:[log in to unmask]]
>On Behalf Of Dave Basden
>Sent: Friday, March 21, 2014 12:56 PM
>To: [log in to unmask]
>Subject: Winkey and N3FJP's ACLog
>
>I recently obtained two Winkey USB units on approval to use in connnection
>with my ACLog logging program.  I'm having trouble getting the two to work
>together.  The Winkey keys the rig in stand alone mode, so I think I have
>the cables and com port identified correctly.  I can't get seem to get the
>logging program to control the keying though.  As I have the same problem
>with either of the two Winkey USB units, I'm pretty sure it is something I'm
>doing or not doing.  If anyone has experience with the Winkey USB and ACLog,
>I would greatly appreciate any suggestions he/she might have.  Thanks.
>
>73,
>
>Dave, W7OQ