Tom,

I'm guessing that "GOP" stands for grid over-current protection.  Since you 
got the amp used, you might have such a board installed, in which case, your 
relay would trip if grid current exceeded what it's supposed to be.  This 
may mean that backing off your Mic gain to the point where your AGC isn't in 
the red all the time will fix the problem.

Steve

----- Original Message ----- 
From: "Tom Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, March 12, 2014 17:57
Subject: response from the Amaritron AL811 E-mail List Re Tripping Relay


> All:
>
> Below is a response from Tom (W8JI) regarding my tripping relay issue.
>
> I don't fully understand all of the technical details here, or how best to
> address them, but would be interested in any thoughts anyone has.
>
> Thanks, Mike, for posting my quiry, and sending this response to me.
>
> Tom Behler: KB8TYJ
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Michael Ryan
> Sent: Wednesday, March 12, 2014 4:38 PM
> To: [log in to unmask]
> Subject: Re_tripping relay
>
> Tom:
>
> Here's tom W8JI's reply regarding your tripping relay.
> Hope you can get something out of it.
>
> 73:
> Mike VO1AX
>
> Mike,
>
> In the text question below, I am not familiar with the TS590 menu 
> settings.
>
> That aside, I am assuming he has a GOP board installed. If so, the GOP 
> will
> trip on peaks over 193 mA.
>
> Something is causing peak current to exceed 193 mA, or he could have a bad
> meter protection diode causing the grid meter to be wrong.
>
> He does have that board installed??
>
> Why not use a tone oscillator that lets you hear the grid current? It 
> would
> be pretty easy to use the ALC jack for that output if you have an external
> oscillator. The grid meter is 0.3 volts full scale at 200 mA.
>
> 73 Tom
>