Hi Kent,
Hope you are enjoying the radio. I did forget to mention the raised
dots for the RCA jacks, but I had noticed them earlier. I don't
recall if I ever knew about the bumps for the antennas, but maybe 2
months ago John WA2U from NY who sometimes checks into the 40 meter
roundtable had mentioned it to me and I found the dots for the RCA jacks
when I started feeling around the rear panel to see what else might be
there.
Hope to catch you on the air sometime.
73, Steve KW3A
On 12/26/2013 4:40 PM, Kent Plemmons wrote:
> Hi Steve,
> In the last email you sent to me regarding the rear panel of the Ts590S, you
> mentioned a single dot for antenna 1 and a double dot for antenna 2. You
> have probably already found this so I mention it also for the sake of
> others, there is also a single dot just to the left of the left RCA jack and
> a double dot to the right of the right-most RCA jack. I think it is really
> great that Kenwood would go to the effort and forthought to place these
> tactile markers for visually impaired users. In the overall scheme of
> things, we are a tiny minority of purchasers of this radio yet they still
> do this.
>
> Kent Plemmons KK4FFF
>
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Steve Forst
> Sent: Friday, December 20, 2013 4:51 PM
> To: [log in to unmask]
> Subject: Re: TS590S front and rear panel
>
> Kent,
>
> There is no 590a so it must be a typo. I did get my front panel list from
> icanworkthisthing.com
>
> I don't remember getting a rear panel list anywhere, but there isn't much
> back there (compared to the front), so here it goes:
>
> Looking at the rear, across the top from left to right:
> Ant2
> Ant1
> (feel between the 2 connectors towards the top of the radio and feel 2
> raised dots near Ant 2, and 1 dot for Ant1)
>
> Moving to the right just below the top is the 6 pin molex for external auto
> tuner.
>
> At the far right, upper right hand corner is the 4 pin molex power
> connector
>
> Across the bottem from left to right:
> RS232
> USB
> 1/8 jack for external speaker
> 13 pin round din for data connection and audio in/out
> 7 pin round din for amplifier connection
> 1/8 jack for straight key or pc cw keying
> 1/4 jack for cw paddle
>
> At the far right, lower right hand corner of the rear panel are 2 RCA jacks.
> One is for RX antenna, and the other is for driving a transverter or
> something. I forget which is which off hand, but you won't need these right
> now I'm sure.
>
> 73, have fun, Steve KW3A
>
>
> On 12/20/2013 3:59 PM, Kent Plemmons wrote:
>> Hi list,
>>
>> Does anyone know where I could get a description of both the rear and
>> front panel of the TS-590S? I see where icanworkthisthing.com has a
>> description of a TS-590A. Would this be the same as the TS-590S?
>>
>> I'm reading the manual of the TS-590S from icanworkthisthing.com but
>> it does not provide location information of the connections on the rear
> panel.
>>
>>
>>
>> Thank you for any help,
>>
>>
>>
>> Kent Plemmons
>>
>> Clyde NC KK4FFF
>>
>>
>>
>>
>>
>
>
>
|