Subject: | |
From: | |
Reply To: | |
Date: | Tue, 19 Nov 2013 19:52:31 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Thank you Butch. They come with those little pads and two little metal
clips of some sort that aren't used for this radio. Thank you,
Kent
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Butch Bussen
Sent: Tuesday, November 19, 2013 10:20 AM
To: [log in to unmask]
Subject: Re: Installing the voice chip in the 590
The last one I bought for the tmv-71 didn't come with the cushions any more,
came with some strange little plastic clip that I never figured out, so I
just made some pads out or of electrical tape.
73
Butch
WA0VJR
Node 3148
Wallace, ks.
On Mon, 18 Nov
2013, Alan R. Downing wrote:
> Following is the instructions that my friend Steve, N9HE, gave me. He
> just installed the chip/board in his 590. I hope this helps:
>
>
>
> Remove the bottom cover then remove the shield cover. There are 5
> rubber cushions in the VGS-1 package. Use the 2 rubber cushions sized
> 20x30x2mm and 21x21x2.5mm. Attach the larger pad on top of the VGS-1
> and the smaller pad on the bottom of the VGS-1. The remaining
> cushions are not used. Plug in the VGS-1 and replace the shield cover
then replace bottom cover.
>
>
>
> 73
>
> KD7GC
>
>
>
>
>
> Alan R. Downing
>
> Phoenix, AZ
>
>
>
>
|
|
|