Subject: | |
From: | |
Reply To: | |
Date: | Wed, 12 Mar 2014 09:09:11 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Steve, I found it in the manual and it seems the same for the 480
as you describe for the 590. Jim
----- Original Message -----
From: Steve Forst <[log in to unmask]
To: [log in to unmask]
Date sent: Wed, 12 Mar 2014 11:58:08 -0400
Subject: Re: vfo reset
hi Barb,
No problem.
Press and hold the A/B button while powering up the radio. A/B
is
third key in the second row of the keys to the right of the VFO
knob.
When it powers up, release the A/B key and the voice will ask for
conformation. She will either say "full reset?" or "VFO reset".
Turn
the multi knob to get the one you want. VFO reset is a partial
reset
and should save memories and menus. Full reset blows everything
away to
default specs.
When you hear the one you want: Full or VFO reset, hit the A/B
key again
and it will happen.
If you have the ARCP-590 software, you can save all your settings
first
and even do the reset from the software.
I don't know about the VFO reset, but in a full reset you will
lose some
things like power setting, mic gain, carrier, etc.
Good luck, Steve KW3A
On 3/12/2014 11:17 AM, Barbara Lombardi wrote:
I have to do a VFO reset on my 590. Turned power supply on and
off quickly
and it screwed up keypad. Don't think can do it without sighted
help.
Anyone have experience with this?
Barb K1EIR
|
|
|