Jim,
The Control Z is what I was looking for.

Thanks

John  KC2QJB


-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Jim Kutsch, KY2D
Sent: Monday, February 10, 2014 8:10 PM
To: [log in to unmask]
Subject: Re: N3FJP ACLOG

John,
Yes, I use it with Jaws. The only real Jaws hint I can offer is that you
need to press control-z when in ACLog to bring focus to the spotting window.
Then arrow up or down to what you want. Pressing enter goes to that band,
mode, and frequency.

Yes, you can customize what it displays. But, you have to login to the
actual cluster to do that which you need to do via a telnet client. More can
be found at http://bcdxc.org/ve7cc/ccc/CCC_Commands.htm 

If you have specific questions, let me know.

73, Jim



-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of John Vernaleken
Sent: Monday, February 10, 2014 5:28 PM
To: [log in to unmask]
Subject: N3FJP ACLOG

Hello All,
I finally got around to setting up  Rig Control and the Spotting Cluster. Is
anyone using the Cluster with JAWS? Any hints or tricks would be welcome.

Also is there a way to customize  the Cluster, like only selecting certain
bands or modes?

John  KC2QJB