BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG
Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Installing the voice chip in the 590
From:
Butch Bussen <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Tue, 19 Nov 2013 07:19:43 -0800
Content-Type:
TEXT/PLAIN
Parts/Attachments:
TEXT/PLAIN (42 lines) 
The last one I bought for the tmv-71 didn't come with the cushions any 
more, came with some strange little plastic clip that I never figured 
out, so I just made some pads out or of electrical tape.
73
Butch
WA0VJR
Node 3148
Wallace, ks.


On Mon, 18 Nov 
2013, Alan R. Downing wrote:

> Following is the instructions that my friend Steve, N9HE, gave me.  He just
> installed the chip/board in his 590.  I hope this helps:
>
>
>
> Remove the bottom cover then remove the shield cover. There are 5 rubber
> cushions in the VGS-1 package.  Use the 2 rubber cushions sized 20x30x2mm
> and 21x21x2.5mm.  Attach the larger pad on top of the VGS-1 and the smaller
> pad on the bottom of the VGS-1.  The remaining cushions are not used.  Plug
> in the VGS-1 and replace the shield cover then replace bottom cover.
>
>
>
> 73
>
> KD7GC
>
>
>
>
>
> Alan R. Downing
>
> Phoenix, AZ
>
>
>
>

ATOM RSS1 RSS2