Have not heard of this problem before but doesn't surprise me as connectors
would be the first thing to go. Luckily, it is something that you wouldn't
typically be changing out too often. Wonder what type of speaker you are
using. Have always just used headphones or the speaker in the 590s but I
know there are plenty of good ones with filters built into them etc. Had
bought a real basic kenwood speaker many years ago that was nothing but a
little speaker that may have gone alongwith a 440 or something. didn't care
for the sound of it at all.
Also used the Clear voice, or something sounding similar, which had the dsp
builtin but the 590 has much better dsp than that so haven't used it for
years. Curious what you have found to be good. Dave
----- Original Message -----
From: "Tom Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, September 18, 2013 10:41 AM
Subject: Re: Question On TS590 External Speaker Jack
> Ed:
>
> Well, that's what I'm doing for now.
>
> As I indicated, the problem isn't too serious, in that once I get the
> speaker plug seated in there and just leave it alone, things work fine.
>
> I just thought I'd ask to see if I'm the only one who has experienced this
> issue with the 590.
>
> Tom Behler: KB8TYJ
>
> ----- Original Message -----
> From: "Ed Malmgren" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, September 18, 2013 10:37 AM
> Subject: Re: Question On TS590 External Speaker Jack
>
>
>> Gm Tom, I am not sure but probably that jack is soldered to a circuit
>> board
>> which makes them pretty flimzy in my opinion. I had that same thing with
>> another rig and when I sent it in for another problem I had them solder
>> it
>> back in place. So when plugging into that jack do so with care. good
>> luck.
>> Ed K7UC
>>
>> --------------------------------------------------
>> From: "Tom Behler" <[log in to unmask]>
>> Sent: Wednesday, September 18, 2013 8:31 AM
>> To: <[log in to unmask]>
>> Subject: Question On TS590 External Speaker Jack
>>
>>> Hi, all.
>>>
>>> Recently, I have noticed that the external speaker jack on my TS590 does
>>> not
>>> allow for a tight connection with the standard mini phono plug on the
>>> external speaker that I like to use.
>>>
>>> I have checked the connections on the speaker plug, and they are
>>> electrically solid.
>>>
>>> I also have tried several other speakers, and have gotten the same
>>> results.
>>>
>>> It's almost like the jack mechanism that holds the plug is depressed too
>>> far
>>> to allow for a tight fit.
>>>
>>> If I connect the speaker and work with the plug to properly seat the
>>> connection, everything works fine.
>>>
>>> Obviously, I don't want to start messing with the jack and make things
>>> worse, but I'm wondering if others have had this issue,and if so, how
>>> you
>>> might have resolved it.
>>>
>>> Thanks, and 73 from Tom Behler: KB8TYJ
>>
|
