John:

I use com port 1 for CW sending, and com port 5 for rig interface, so I knew 
that wasn't the reason for the error.

Anyway, I have solved the com port issue now, so hopefully, won't have to 
deal with the program locking up on me any more.

Tom Behler: KB8TYJ

----- Original Message ----- 
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, September 15, 2013 6:09 PM
Subject: Re: A C Log Issue Solved


> If you are using the same comm number for rig control as for the N3FJP
> program at the same time, only one can use it at a time. That would be the
> main reason I could see for a com port error.
> ----- Original Message ----- 
> From: "Kelvin Marsh" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, September 15, 2013 1:18 PM
> Subject: Re: A C Log Issue Solved
>
>
>> Hi Tom,
>>
>> It will be interesting to hear how you get on.  I assume the 590 USB
>> connection assigns a Com Port, but you will use this for the rig control.
>> I
>> wonder how you then key the 590?  Presumably using the same connection,
>> but
>> what do you tell the  N3FJP software?  I bet the solution is simple...
>>
>> Best wishes, Kelvin Marsh - M0AID
>>
>> Working to improve accessibility for radio amateurs with disabilities
>>
>> www.active-elements.org
>>
>> For accessibility evaluations of amateur equipment and MP3 manuals
>>
>>
>> -----Original Message-----
>> From: For blind ham radio operators 
>> [mailto:[log in to unmask]]
>> On Behalf Of Tom Behler
>> Sent: 15 September 2013 16:59
>> To: [log in to unmask]
>> Subject: A C Log Issue Solved
>>
>> Hi, again.
>>
>> After several attempts, I successfully cleared the previously-mentioned
>> com
>> port error message from A C Log via the windows task manager, so it looks
>> like I have now solved my com port message clearing problem.
>>
>> Now, it's onto figuring out why I'm getting the com port error, and what
>> to
>> do about it.
>>
>> I'll get this right yet.  (smile)
>>
>> Tom Behler:; KB8TYJ
>