Gale & Steve,

Thanks guys.  Got it working.

Just for confirmation, I gather it isn't possible to have swr, power output
and alc read with the same pf key?  I assume one would have to either set up
2 keys, or change the values in the menu to switch between power out and
swr/alc.  Is this correct?

Many thanks,  


Tim.

Bangor, N. Ireland.

Skype:  tim-crawford

 Twitter:  tim_gi4oph


-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Gale Conard
Sent: 20 June 2013 02:26
To: [log in to unmask]
Subject: Re: TS590 question.

Tim:

I had the same problem at first.

1.  Menu 80 should show 201.
2.  Apply a steady CW carrier.
3.  Press meter key. (You should hear Power reading, I.E. P100.)

Now:
1.  Set menu 80 to 202.
2.  Apply a steady CW carrier.
3.  Press meter key.  (You should hear one of two readings.)

1.  "R1.0" or whatever the SWR may be.
2.  "A10" or whatever the A L C reading may be.
3.  If R or A is not what you want, press the key next to the meter key to
change it.

I hope this helps.
73,
Gale
[log in to unmask]



----- Original Message -----
From: "Tim Crawford (GI4OPH)" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, June 19, 2013 4:35 PM
Subject: TS590 question.


Hi all,

I've recently acquired a ts590, and not having fully read the user manual
yet, was wondering could someone provide some instructions in getting the
VGS1 to announce power, swr etc.

When I press the meter button while applying a carrier nothing is spoken.

Thanks in advance.

Best 73,



Tim.

Bangor, N. Ireland.

Skype:  tim-crawford

 Twitter:  tim_gi4oph
73,
Gale
[log in to unmask]