Subject: | |
From: | |
Reply To: | Bob, K8LR |
Date: | Tue, 19 Nov 2013 11:47:49 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I put my VGS1 in a long time ago, but I think I used the thin foam pads, one
on the bottom and one on the top to insulate the board.
Bob, K8LR, [log in to unmask]
----- Original Message -----
From: "Steve Forst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, November 18, 2013 9:52 PM
Subject: Re: installing VGS1 on TS-590
The manual does say to use 2 foam pads and the other 3 are not used,
but the description isn't very clear on the placement. It does say to
attach them to the vgs-1, so maybe one goes on each side? If you
can't find someone to look at the picture or drawing or whatever is on
page 71 of the print manual, maybe a little trial and error is in order
and see what fits best.
Sorry I can't be of more help, but I had mine installed at HRO and never
had my hands in there.
73, Steve KW3A
On 11/18/2013 9:28 PM, Howard, W A 9 Y B W wrote:
> Kent,
>
> I'm not sure you use the foam blocks in the 590. I don't remember using
> them when mine was installed. Keep in mind that that board goes in more
> then one model and the foam may be used in another model.
>
> Howard #3
>
> ----- Original Message -----
> From: "Kent Plemmons" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, November 18, 2013 6:03 PM
> Subject: installing VGS1 on TS-590
>
>
>> Good evening list,
>>
>>
>>
>> Can anyone instruct me regarding placement of the two small cushions that
>> install on the VGS1 synthesizer for the Kenwood TS-590S?
>>
>>
>>
>> I know where the VGS1 installs and I have the proper two cushions. I
>> don't
>> know if one cushion installs on each side of the VGS1 or if they both
>> install on the top of the synthesizer. Does anyone know?
>>
>>
>>
>> Thank you very much,
>>
>>
>>
>> Kent Plemmons
>>
>> Near Clyde NC
>>
>> KK4FFF
>>
>>
>>
>>
>
>
>
|
|
|