-----Original Message-----
From: Harold E. Schumacher, Jr. <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Saturday, April 18, 1998 2:14 AM
Subject: [PCBUILD] BIOS message....
>
> What does this message mean from a PhoenixBIOS ver. 4.04-----
>
> 3F8H COM address conflict
3F8H is the default address for COM1. You most likely have a modem at COM1
and a serial port on the system which is also configured for COM1.
>It then tries to boot up some more; I get an F1 resume or an F2
>setup. I tried going into the setup, but don't see anything to
>change.
Press F2, enter setup, and find your serial port settings. Change the serial
port that's assigned to COM1 to COM2 or some other setting. If you don't
want to change your serial port, you can change the setting on your modem.
----------
Dan Chapman
Network Analyst
Microsoft Certified Systems Engineer
[log in to unmask]http://www.rpguniverse.com