Subject: | |
From: | |
Reply To: | |
Date: | Wed, 19 Jun 2013 19:26:13 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Tim:
I had the same problem at first.
1. Menu 80 should show 201.
2. Apply a steady CW carrier.
3. Press meter key. (You should hear Power reading, I.E. P100.)
Now:
1. Set menu 80 to 202.
2. Apply a steady CW carrier.
3. Press meter key. (You should hear one of two readings.)
1. "R1.0" or whatever the SWR may be.
2. "A10" or whatever the A L C reading may be.
3. If R or A is not what you want, press the key next to the meter key to
change it.
I hope this helps.
73,
Gale
[log in to unmask]
----- Original Message -----
From: "Tim Crawford (GI4OPH)" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, June 19, 2013 4:35 PM
Subject: TS590 question.
Hi all,
I've recently acquired a ts590, and not having fully read the user manual
yet, was wondering could someone provide some instructions in getting the
VGS1 to announce power, swr etc.
When I press the meter button while applying a carrier nothing is spoken.
Thanks in advance.
Best 73,
Tim.
Bangor, N. Ireland.
Skype: tim-crawford
Twitter: tim_gi4oph
73,
Gale
[log in to unmask]
|
|
|