Ok, well that's cool. Guess I don't feel ripped off. Jim WA6EKS
----- Original Message -----
From: Colin McDonald <[log in to unmask]
To: [log in to unmask]
Date sent: Tue, 21 May 2013 19:52:29 -0600
Subject: Re: TS-2000
I think we're talking in factors of tenths of a micro volt on
sensativity
though.
It's not like it was deaf before, and suddenly it's a hot
receiver on
2M/70CM.
It's one of the better receivers available for 2m and 70CM SSB
weather you
have an older one or a newer one.
The noise floor and sensativity mods that are out there on the
internet were
never implemented into any of the generations of the ts2000.
So if ones after 05 are more sensative, it's because they did
something
minor and it increased it by 0.01UV or something.
73
Colin, V A6BKX
----- Original Message -----
From: "Jim Gammon" <[log in to unmask]
To: <[log in to unmask]
Sent: Tuesday, May 21, 2013 7:18 PM
Subject: Re: TS-2000
Hi John, well, I think my 2000 is at least 10 or more years
ancient. Don't know what the serial number is, but I can't
complain too much because I also have a TS-480 and, while it
isn't nearly as killer as the 590, and now the 900, it does
alright for me, a non-contester. Jim WA6EKS
----- Original Message -----
From: John Miller <[log in to unmask]
To: [log in to unmask]
Date sent: Tue, 21 May 2013 21:10:32 -0400
Subject: Re: TS-2000
A=B is, on the right side of the radio there are the knobs for
volume, rf
gain and all that, just to the left of those, below the big
diamond shaped
button, there are 4 indented buttons, in that group of 4, it's
the bottom
right one. I don't know how old yours is but that sensitivity
issue was
pre2005 I believe. Mine was made in 2008 and can hold it's own
with anything
out there on receive even on vhf. The one problem I have had is
the one I
mentioned on the list last week and that was a 2008/2009 run
issue and will
be fixed for the cost of shipping. Now if I can just get that
but that's a
story for another day, the TS-450 will have to do for a few
weeks.
----- Original Message -----
From: "Jim Gammon" <[log in to unmask]
To: <[log in to unmask]
Sent: Tuesday, May 21, 2013 8:58 PM
Subject: Re: TS-2000
As a new Kenwood 2000 user, where is the a equals b key? I find
the observation that the older 2000's are less sensitive than
the
newer ones kind of disheartening, especially because I got the
this rig not only for HF, but for 2 meter SSB. Jim WA6EKS
----- Original Message -----
From: John Miller <[log in to unmask]
To: [log in to unmask]
Date sent: Tue, 21 May 2013 20:39:35 -0400
Subject: Re: TS-2000
You're right. I can tell with mine if I did it because I have
the beep
volume turned way down.
----- Original Message -----
From: "Colin McDonald" <[log in to unmask]
To: <[log in to unmask]
Sent: Tuesday, May 21, 2013 5:37 PM
Subject: Re: TS-2000
what did you screw up? you can do a full or partial reset.
Partial won't
kill all your memories and tuner settings like the full reset
does.
Press the A equals B key while powering the radio on. Give it a
second
after powering on then hit the A equals B key again to confirm.
I think the partial reset is the same but with the A plus B key.
You'll know you've done it if you have the speech synth turned
down a bit
from default...it'll come back loud.
73
Colin, V A6BKX
----- Original Message -----
From: "Gary Tillinghast" <[log in to unmask]
To: <[log in to unmask]
Sent: Tuesday, May 21, 2013 3:31 PM
Subject: TS-2000
Hi all,
I screwed up my TS-2000 and need to do a full reset. I thought
I had =
saved the procedure for doing this. Can anyone share this?
Thanks.
|