BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Gerry Learry <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Tue, 12 Mar 2013 08:28:07 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (58 lines)
Move the modem around.
----- Original Message ----- 
From: "Curtis Delzer" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, March 11, 2013 9:46 AM
Subject: Re: FM Transmitter Issues And Questions


>I do know that when I turn my WIFI off on the modem, the pulsating 
> sound disappears.
> 
> 
> At 08:29 AM 03/11/13, you wrote:
>>Pretty sure there is no conflict between WiFi and the FM
>>transmitter.  I would be surprised if that was the case.  Jim
>>WA6EKS
>>
>>  ----- Original Message -----
>>From: Curtis Delzer <[log in to unmask]
>>To: [log in to unmask]
>>Date sent: Mon, 11 Mar 2013 07:39:35 -0700
>>Subject: Re: FM Transmitter Issues And Questions
>>
>>it might be picking up the pulsations from your WIFI setup.  try
>>temporarily turning that off and see if it goes away.
>>if it does, try using the transmitter further away from your
>>modem? router?
>>
>>
>>At 11:05 PM 03/10/13, you wrote:
>>      Hi list,
>>
>>Since this is one of the lists where I got information about an
>>FM
>>transmitter for feeding audio from my computer to FM receivers
>>through out
>>my house and property, I thought I would inquire here again.
>>
>>I have purchased the Sansonic FM transmitter that someone
>>referenced on this
>>list a few months ago.  It does a real nice job with meeting my
>>requirements
>>of clear and clean signals through out my property.  However, I
>>have run
>>into one problem.  I have the transmitter fairly close to the
>>computer from
>>which I am running the audio.  It is about 4 feet away from the
>>computer.  I
>>am getting a pulsating hum through the computer speakers when the
>>transmitter is operating.  The transmitter runs from 1 to 7
>>watts.  In light
>>of the issue, I don't dare put the power any higher than 1
>>watt--and I
>>really don't need to anyway.
>>
>>What can I do to solve this problem?  Any help would be greatly
>>appreciated.

ATOM RSS1 RSS2