BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Junior Lolley KG4ITD <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Sun, 3 Mar 2013 18:03:32 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (83 lines)
Pat, I have a dual band mag mount antenna on my 2009 Dodge Caravan.
It is a Diamond 2 and 440 and the mag mount is heavy duty.
I have the coax running through the right side rear sliding door.
I have never had a problem with it.
I have had the antenna and mount on the van for over two years.
The coax looks like it is almost new.
And this coax is in very hot conditions as well as wet conditions.
I paid $80.00 for the antenna and $50.00 for the mount through HRO.


 Junior Lolley
Amateur radio call KG4ITD
Liberty County Emergency Coordinator
"Be careful how you treat people on your way up because you might meet them
again on your way down!!!"


 


-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Pat Byrne
Sent: Sunday, March 03, 2013 5:32 PM
To: [log in to unmask]
Subject: Re: Mobile Antenna Mount Options

Tom,
To add to what Colin suggests; I believe that Diamond makes a very decent
line of antenna mounts and perhaps they have a good mag mount that would
fill your needs.  And of course if you could push off your purchase to
Dayton, you could get your hands on all the choices and make an informed
decision.  And besides, those of us who are there with you would give you
all kinds of unsought advice!
Pat, K9JAU At 02:44 PM 3/3/2013, you wrote:
>Hi, all.
>
>I need to tap into the wisdom of the group here concerning mobile 
>antenna mounts.
>
>To set the background, the XYL and I have  leased a Subaru Forester for 
>about the last 3 years, and I have been using a magnount antenna mount 
>for the Diamond 770 dual-band antenna that I have used for years with 
>our family vehicles.  I bought this particular  magmount about 2 years 
>ago, to replace one that had been failing or at least questionable for 
>quite some time.  We put the magmount in the center of the roof of the 
>car, and try to thread the feedline as carefully as possible into the 
>back door of the vehicle, where it then goes to a TMV71A underneath the
front drivers seat.
>
>This set-up has actually worked surprisingly well, but I'm now  having 
>a problem with the coax feed line to the current magmount.  I have 
>noticed several breaks along the feed line, one or two of which could 
>have been caused by inadvertently closing the back vehicle door on the coax
feed line.
>Again, I had thought we were avoiding this problem, but maybe not.  
>Also, one or two of the breaks seem to be caused by the outside jacket 
>of the feed line becoming very brittle and actually splitting.
>
>So, I'm now thinking of other possible ways to mount my mobile antenna.
>Things, of course, are complicated in that we can't drill holes in the 
>leased vehicle.
>
>One option I had thought of is a trunk mount, but I'm having trouble 
>envisioning how such a mount would work when you open up the trunk for 
>storing groceries and other things.  Also, I can't imagine that the 
>antenna on a trunk mount would work very well anyway, since it is so 
>much lower than the roof of the vehicle.
>
>Has anyone had experience with trunk mounts?
>
>If I stick to a magmount, does anyone have a magical formula for 
>threading the feed line from the outside of the vehicle into the car so 
>as to avoid problems with it getting caught in the door
>
>?Is there a better-quality  magmount out there that has stronger feed 
>line that might not be as susceptible  to breaking or splitting?
>
>Obviously, I've got lots of questions here, so any help would be 
>appreciated.
>
>Tom Behler: KB8TYJ

ATOM RSS1 RSS2