BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Jim Gammon <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Sat, 29 Sep 2012 12:26:47 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (78 lines)
Does that same feature apply to the TS-480? Have never heard of 
it.  Jim WA6EKS

 ----- Original Message -----
From: Steve Forst <[log in to unmask]
To: [log in to unmask]
Date sent: Sat, 29 Sep 2012 06:43:31 -0400
Subject: Re: Beware of the DRV Function On The TS590

That's right Bob.   For driving a transverter or any other device 
that
only  needs  a minimal amount of drive.   I think it is pulling 
the RF
from the driver transistors before it gets to the  final PA 
transistors.

I've heard of others doing this, so it is something we should 
keep in
mind when the rig doesn't seem to be working right.

73, Steve KW3A

On 9/29/2012 12:40 AM, Bob, K8LR wrote:
 Hi Tom,

 I think that the drv function is for driving a transverter, but 
that is just
 an educated guess!

 Bob, K8LR, [log in to unmask]

 ----- Original Message -----
 From: "Tom Behler" <[log in to unmask]
 To: <[log in to unmask]
 Sent: Saturday, September 29, 2012 12:17 AM
 Subject: Beware of the DRV Function On The TS590


 Hello, all.

 What I'm going to share here may not be big news to some, but 
for those like
 me who never had this problem, it is a bit disconcerting.

 Tonight, I decided to fire up and get re-acquainted with my 
TS590, since I
 probably hadn't even turned it on for a month and a half.  I had 
taken some
 SWR and output power readings using the rig's  internal meter, 
and
 everything looked great, until I tried getting on the air.

 Even if I was on a resonant or near-resonant frequency for one 
of my
 antennas, the rig's auto-tuner would not tune.

 I played around for quite a while, trying to figure out what was 
wrong, and
 then, I decided to swallow my pride, and ask the sighted XYL for 
help.

 It turns out that I inadvertently had activated the DRV 
function.  This
 happens when you press the meter function button down too long.  
The meter
 switch is one of the few buttons that doesn't talk on the rig, 
so it's very
 easy to make this mistake.  Once the meter switch  button was 
re-set to
 normal, everything was fine again.

 Does anyone know what the DRV function is, and has anyone ever 
used it?

 Just curious.

 73 from Tom Behler: KB8TYJ

ATOM RSS1 RSS2