Doug,
That makes sense. So, I would guess that sq=0 means that it is off,
while sq=1 would be on. If that is the case, perhaps the setting
already set in sqlevel= would have some effect. i'd be interested in
hearing what your friend tells you.
I usually run the FSK filter at 250 hz, which is the lowest setting, and
along with least amount of audio input to the sound card to give good
print, I can limit the amount of garbage text. Using the squelch would
probably be a nice addition.
73, Steve KW3A
On 7/8/2012 8:00 PM, Doug Payne wrote:
> Steve,
>
> Thanks for pointing this out. I was wondering whether there was a config or
> ini file I could adjust, but I hadn't gotten around to looking yet.
>
>>From what I read the SQ button in the control panel just enables or disables
> the squelch, and adjusting the level involves moving an indicator via the
> mouse. I think I will call up a sighted friend who uses MMTTY, and ask him
> to adjust his squelch setting to see how the config file entries are
> affected.
>
> So, have you been able to adjust your setup so MMTTY doesn't decode anything
> when there is no signal in the passband? I know you said you don't use the
> software squelch.
>
> --Doug, AC7T
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Steve Forst
> Sent: Sunday, July 08, 2012 11:18 AM
> To: [log in to unmask]
> Subject: Re: RTTY for Doug
>
> Doug,
>
> I'll throw one more thing at you: If you can't set the squelch to your
> liking via the control panel, maybe you can edit the config file.
>
> I've found over the years that some programs that aren't very accessible
> in the normal fashion can be tweaked via the configuration file.
>
> I haven't done this, and can't promise it will work, but may be worth a try.
>
> You will find the file under the mmtty folder of your programs files
> folder. It's just a text file and will open with notepad. I'd suggest
> backing up the file first just to be safe.
>
> In the text file you will see:
> "AFCSQ=32" which is the AFC squelch you find under the "setup mmtty"
> dropdown menu.
>
> Further down is:
>
> SQ=0
> SQLevel=6.000000e+02
>
> I'm wondering if changing the sq=0 to a higher number may be the same
> as changing it from the control panel. I have no idea what the second
> line is, and I wouldn't mess with it myself, but you may be braver than me.
>
> Even if this works, it's not something you would do on the fly while
> operating, but maybe you could find a setting that gives satisfactory
> results.
>
> 73, Steve KW3A
>
>
>
|