Ok Tom, That makes sense. I know that same button if pressed in FSK
mode reverses the mark and space, so in CW it must behave in the way
you mentioned. Sorry about that.
Instead of rewiring the paddle, it may be just as much effort to wire
up an adapter to reverse the wires and use it when the paddle is used
with the 570. Then you can use the paddle on other radios without the
adapter.
73, Steve KW3A
On 5/2/2012 6:58 PM, Tom Behler wrote:
> Steve:
>
> I think I tried this, and it reversed the CW receive and transmit frequency
> in relation to the main carrier.
>
> I don't think it reverses the paddle setting.
>
> If I'm wrong, I'm hopeful that other listers will correct me.
>
> 73 from Tom Behler: KB8TYJ
>
> ----- Original Message -----
> From: "Steve Forst"<[log in to unmask]>
> To:<[log in to unmask]>
> Sent: Wednesday, May 02, 2012 8:32 AM
> Subject: Re: quick TS570 question
>
>
>> Tom,
>>
>> I know there is a reverse mode in the 570 and I think it is a single
>> button push. There is a reverse or rev button somewhere. I think it
>> may be near the clear button, probably near the bottom of the number
>> pad. In cw, press it and see if it fixes things.
>>
>> 73, Steve KW3A
>>
>> On 5/2/2012 6:41 AM, Tom Behler wrote:
>>> Yeah, but the contortions I'll have to go through to do that would be
>>> quite interesting! (big grin)
>>>
>>> Somehow, re-wiring a paddle temporarily seems easier! (grinning again)
>>>
>>> Tom Behler: KB8TYJ
>>>
>>> ----- Original Message -----
>>> From: "Howard, W A 9 Y B W"<[log in to unmask]>
>>> To:<[log in to unmask]>
>>> Sent: Tuesday, May 01, 2012 10:42 PM
>>> Subject: Re: quick TS570 question
>>>
>>>
>>>> Tom,
>>>>
>>>> Just use your other hand and all will be OK
>>>>
>>>> 73's
>>>>
>>>> Howard #3
>>>>
>>>> ----- Original Message -----
>>>> From: "Tom Behler"<[log in to unmask]>
>>>> To:<[log in to unmask]>
>>>> Sent: Tuesday, May 01, 2012 8:33 PM
>>>> Subject: quick TS570 question
>>>>
>>>>
>>>>> Hello to all you TS570 experts out there.
>>>>>
>>>>> I am trying to test the TS570 that I picked up from the estate sale in
>>>>> our
>>>>> local area, and have run into an interesting situation.
>>>>>
>>>>> I want to set up my bencher B Y 1 paddle to send CW, but the keying is
>>>>> reversed from what I'm used to. In this case, the dahs occur when I
>>>>> press
>>>>> the inner paddle that faces toward me, while the dits occur when
>>>>> pressing
>>>>> the out paddle which faces away from me. I would like to reverse the
>>>>> paddles, but can't seem to find a menu item to do this. Could it be
>>>>> that
>>>>> ,
>>>>> unlike the TS590 and I think the TS480, the TS570 does not contain a
>>>>> menu
>>>>> item that allows this adjustment to be made? Is the only way to
>>>>> reverse
>>>>> the
>>>>> paddles to manually reverse the wires on the bottom of the keyer?
>>>>>
>>>>> I'd appreciate any thoughts anyone has on this issue.
>>>>>
>>>>> 73 from Tom Behler: KB8TYJ
>>>>
>>>
>>>
>>>
>>
>
>
>
|