BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Pat Byrne <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Sun, 19 Aug 2012 13:31:33 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (101 lines)
Was the coax stub still attached when you did the continuity test 
across the ladder line?  If so, either in that coax piece or 
somewhere along the length of the ladder line, or at the top.  And 
the bummer is that now you're at home and can't scope out all the 
possibilities!!
PatAt 01:07 PM 8/19/2012, you wrote:
>     Pat:
>
>I also had the continuity reading across the connector with the original
>PL259, so temporarily replaced it with one of those Shakespeare solderless
>connectors from West Marine, Inc., and still got the continuity reading
>across the connector.
>
>When I checked each side of the ladder line where the connection to the
>short piece of coax cable is made, I got continuity too across the ladder
>line connection.
>
>So, I am not quite sure what to think here.
>
>Tom Behler: KB8TYJ
>
>----- Original Message -----
>From: "Pat Byrne" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Sunday, August 19, 2012 11:59 AM
>Subject: Re: G5RV Disappointment
>
>
> > Tom,
> > I will check my antenna for continuity today but I would expect that
> > you shouldn't have continuity at D C.  So perhaps there is a short in
> > the PL259.  Also my antenna recommended a lot of coax after the twin
> > lead, either fifty or seventy-five feet, I don't recall which.  So
> > perhaps you would have a jumper around that you could incorporate in
> > to the system next weekend.  The height should be good - don't give
> > up on it just yet.
> > Pat, K9JAUAt 10:48 AM 8/19/2012, you wrote:
> >>Hi, all.
> >>
> >>Well, I tried the G5RV out at the RV over the week-end, and alas, no joy.
> >>I
> >>have some theories about what the problem was, which I'll get to shortly.
> >>
> >>First, the good news:  The camp site manager had absolutely no problem
> >>with
> >>my putting up the antenna, and in fact helped with our initial
> >>installation.
> >>So, at least I know I'm good to go if I want to try something else out
> >>there.
> >>
> >>Since the guy was nice enough to help with the installation, I decided to
> >>go
> >>ahead with his initial suggestion of putting the center on top of his RV,
> >>which is about 50 feet from ours, and much higher than ours.  The legs of
> >>the antenna then went across his roof on each side to adjacent trees.  He
> >>did wrap one part of one leg  around the railing of his RV ladder to keep
> >>things in place.  The ladder line then came down from the center of the
> >>antenna on about a 45 degree angle to the PL259feed point connection on my
> >>RV.  I'd say the center of the antenna was up about 30 feet, with the legs
> >>up about 15 to 20 feet on adjacent trees.
> >>
> >>Overall, my SWR's must not have been good, because the only band I could
> >>get
> >>the TS480 auto-tuner to tune it on was 10 meters.  Everything else gave me
> >>the SWR no-tune reading.
> >>
> >>As for what might have gone wrong, I eliminated a number of possibilities:
> >>
> >>1.  I checked my feed line on the RV, and all other jumper connections,
> >>for
> >>electrical integrity, and they were fine.  I then physically checked the
> >>connections on the G5RV itself, and they  looked fine.  I had my XYL
> >>confirm
> >>this visually as well.
> >>
> >>As for what could have gone wrong, then, my theory is that perhaps the
> >>roof
> >>on the manager's RV was metal, or had metal in it, which served to de-tune
> >>the antenna.  Wrapping one leg around the RV railing for a turn or two
> >>also
> >>might have thrown things off.
> >>
> >>Finally, I did one thing in the way of continuity checking that I want to
> >>be
> >>sure of with you G5RV experts out there.  When you do a continuity check
> >>of
> >>the G5RV on the PL259 end, is it correct that you get electrical
> >>continuity
> >>across the coax connector?  In other words, when I took my continuity
> >>checker, put one lead on the center conductor, and the other on the outer
> >>shield of the connector, I got continuity.  I assume this indicates that I
> >>have an electrically complete antenna.  Please correct me if I'm wrong on
> >>this.
> >>
> >>All in all, it was a rather disappointing situation, but if we can get out
> >>to the RV next week-end, we'll try something else, perhaps in nearby trees
> >>if we can figure out a way to get the center up at a reasonable height.
> >>
> >>73 from Tom Behler: KB8TYJ
> >

ATOM RSS1 RSS2