The tuner Harry is using is a manual MFJ 949E so all that needs to be
connected between the Kenwood 570 is a coax jumper from Antenna 1 or Antenna
2 to the transmitter coax connector on the tuner
And I believe that the 4 key on the number pad will select between the two
antenna connectors on the 570.
73
Howard #3
----- Original Message -----
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, June 28, 2012 2:06 PM
Subject: Re: 2 tners that don't work, how much more can I take!
> You should still need coax to connect to that tuner along with that
> jumper.
> ----- Original Message -----
> From: "Harry Brown" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Thursday, June 28, 2012 2:42 PM
> Subject: Re: 2 tners that don't work, how much more can I take!
>
>
>> Hi Gery,
>> The jumper is plugged into the 570, where the jumper is suppose to plug =
>> into, and it's not coax 1, or coax 2.
>> Trippy
>> ----- Original Message -----=20
>> From: Gerry Leary=20
>> To: [log in to unmask]
>> Sent: Wednesday, June 27, 2012 5:12 PM
>> Subject: Re: 2 tners that don't work, how much more can I take!
>>
>>
>> What connector on the transceiver is the Coax on?
>> ----- Original Message -----=20
>> From: "Harry Brown" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Wednesday, June 27, 2012 1:57 PM
>> Subject: Re: 2 tners that don't work, how much more can I take!
>>
>>
>> > Hi Gery,
>> > Yep, the jumper cable goes from the 570 to the so239 connecter on =
>> the =3D
>> > antenna tuner that says transmitter, and, the coax for the antenna =
>> is =3D
>> > connected to the so239 connecter on the antenna tuner that says coax
>> =
>> 1.
>> > Trippy
>> > ----- Original Message -----=3D20
>> > From: Gerry Leary=3D20
>> > To: [log in to unmask]
>> > Sent: Tuesday, June 26, 2012 11:23 PM
>> > Subject: Re: 2 tners that don't work, how much more can I take!
>> >=20
>> >=20
>> > Are you sure that you have the right plug on the transceiver?
>> > ----- Original Message -----=3D20
>> > From: "Harry Brown" <[log in to unmask]>
>> > To: <[log in to unmask]>
>> > Sent: Monday, June 25, 2012 6:05 PM
>> > Subject: 2 tners that don't work, how much more can I take!
>> >=20
>> >=20
>> > > Hi all,
>> > > Well, $176.90, down the drain for the mfj949e.
>> > > I plug in the antenna into coax 1, and the jumper from the =
>> Kenwood =3D
>> > 570, =3D3D
>> > > and the other end of the jumper to the transmit port, it's also =
>> an =3D
>> > so239 =3D3D
>> > > connecter, and folks, I disabled the tuner in the 570, and =
>> adjusted =3D
>> > for =3D3D
>> > > loudest noise, and there is no loudest noise!
>> > > So, it's a bad tuner.
>> > > Then, we have the kenwood kt1, autotuner, and so I tryed that. I =
>> =3D
>> > plugged =3D3D
>> > > the antenna in to that tuner, and I pluged in the power cable =
>> that =3D
>> > went =3D3D
>> > > from the kt1 to the radio.
>> > > Then, I press the tune button on the kt1, and no tuning noise. =
>> =3D
>> > However, =3D3D
>> > > I then reenabled the autotuner in the radio, and pressed the tune
>> =
>> =3D
>> > button =3D3D
>> > > on the radio, and the kt1 tuner made a noise, like it's tuning =
>> it, =3D
>> > but =3D3D
>> > > of course, we know that since the 570 tuner is now enabled, the =
>> kt1 =3D
>> > is =3D3D
>> > > not gonna tune it.
>> > > I am so tired, just absolutely sick and tired, this is hell for =
>> me.
>> > > Also, Bob, k8lr, I'll call ya tomorrow, or, you can call me, best
>> =
>> =3D
>> > time =3D3D
>> > > is in the afternoon, between 1240 till 3, and anytime after 4.
>> > > I'm looking forward to getting your help with echo link.
>> > > I just wonder sometimes if I'm never ment to get on hf again.
>> > > I hope not, I just got the extra and I can't use it now.
>> > > So much for motivation to get the extra, that was the motivation,
>> =
>> =3D
>> > just =3D3D
>> > > to use those extra frequencies.
>> > > Trippy, ac8s
>>
|
