You should still need coax to connect to that tuner along with that jumper.
----- Original Message -----
From: "Harry Brown" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, June 28, 2012 2:42 PM
Subject: Re: 2 tners that don't work, how much more can I take!
> Hi Gery,
> The jumper is plugged into the 570, where the jumper is suppose to plug =
> into, and it's not coax 1, or coax 2.
> Trippy
> ----- Original Message -----=20
> From: Gerry Leary=20
> To: [log in to unmask]
> Sent: Wednesday, June 27, 2012 5:12 PM
> Subject: Re: 2 tners that don't work, how much more can I take!
>
>
> What connector on the transceiver is the Coax on?
> ----- Original Message -----=20
> From: "Harry Brown" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, June 27, 2012 1:57 PM
> Subject: Re: 2 tners that don't work, how much more can I take!
>
>
> > Hi Gery,
> > Yep, the jumper cable goes from the 570 to the so239 connecter on =
> the =3D
> > antenna tuner that says transmitter, and, the coax for the antenna =
> is =3D
> > connected to the so239 connecter on the antenna tuner that says coax =
> 1.
> > Trippy
> > ----- Original Message -----=3D20
> > From: Gerry Leary=3D20
> > To: [log in to unmask]
> > Sent: Tuesday, June 26, 2012 11:23 PM
> > Subject: Re: 2 tners that don't work, how much more can I take!
> >=20
> >=20
> > Are you sure that you have the right plug on the transceiver?
> > ----- Original Message -----=3D20
> > From: "Harry Brown" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Monday, June 25, 2012 6:05 PM
> > Subject: 2 tners that don't work, how much more can I take!
> >=20
> >=20
> > > Hi all,
> > > Well, $176.90, down the drain for the mfj949e.
> > > I plug in the antenna into coax 1, and the jumper from the =
> Kenwood =3D
> > 570, =3D3D
> > > and the other end of the jumper to the transmit port, it's also =
> an =3D
> > so239 =3D3D
> > > connecter, and folks, I disabled the tuner in the 570, and =
> adjusted =3D
> > for =3D3D
> > > loudest noise, and there is no loudest noise!
> > > So, it's a bad tuner.
> > > Then, we have the kenwood kt1, autotuner, and so I tryed that. I =
> =3D
> > plugged =3D3D
> > > the antenna in to that tuner, and I pluged in the power cable =
> that =3D
> > went =3D3D
> > > from the kt1 to the radio.
> > > Then, I press the tune button on the kt1, and no tuning noise. =
> =3D
> > However, =3D3D
> > > I then reenabled the autotuner in the radio, and pressed the tune =
> =3D
> > button =3D3D
> > > on the radio, and the kt1 tuner made a noise, like it's tuning =
> it, =3D
> > but =3D3D
> > > of course, we know that since the 570 tuner is now enabled, the =
> kt1 =3D
> > is =3D3D
> > > not gonna tune it.
> > > I am so tired, just absolutely sick and tired, this is hell for =
> me.
> > > Also, Bob, k8lr, I'll call ya tomorrow, or, you can call me, best =
> =3D
> > time =3D3D
> > > is in the afternoon, between 1240 till 3, and anytime after 4.
> > > I'm looking forward to getting your help with echo link.
> > > I just wonder sometimes if I'm never ment to get on hf again.
> > > I hope not, I just got the extra and I can't use it now.
> > > So much for motivation to get the extra, that was the motivation, =
> =3D
> > just =3D3D
> > > to use those extra frequencies.
> > > Trippy, ac8s
>
|