BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Howard, W A 9 Y B W" <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Sun, 29 Jul 2012 17:34:15 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (211 lines)
Text only Amateur Radio Frequency Chart, adapted for blind use from the ARRL 
US Amateur Radio Bands chart effective May 6, 2008. This chart has been 
adapted by the Handiham System and last updated on 02 November 2010.  Please 
send corrections or comments to [log in to unmask]
For each band, only those license classes with privileges on that band are 
listed. Technician licensees have limited privileges below 30 MHz.
US Amateur Transmitter Power Limits
At all times, transmitter power must be the minimum necessary to carry out 
the desired communications. Unless otherwise noted, the maximum power output 
is 1500 watts PEP. Novice/Technicians are limited to 200 watts PEP on HF 
bands. Geographical power restrictions apply to the 70 cm, 33 cm and 23 cm 
bands; see The FCC Rule Book for details.

160 Meters
General, Advanced, Amateur Extra licensees:
1.800-2.000 MHz: CW, Phone, Image, RTTY/Data

80 Meters
Novice and Technician classes:
3.525-3.600 MHz: CW Only
General class:
3.525-3.600 MHz: CW, RTTY/Data
3.800-4.000 MHz: CW, Phone, Image
Advanced class:
3.525-3.600 MHz: CW, RTTY/Data
3.700-4.000 MHz: CW, Phone, Image
Amateur Extra class:
3.500-3.600 MHz: CW, RTTY/Data
3.600-4.000 MHz: CW, Phone, Image

60 Meters: Five Specific Channels:
The FCC has granted hams secondary access on USB only to five discrete 
2.8-kHz-wide channels. Amateurs can not cause interference to and must 
accept  interference from the Primary Government users. The NTIA says that 
hams planning to operate on 60 meters "must assure that their signal is 
transmitted on  the channel center frequency." This means that amateurs 
should set their carrier frequency 1.5 kHz lower than the channel center 
frequency.
General, Advanced and Amateur Extra classes:
In each pair of frequencies listed below, you will first  find the Channel 
Center frequency, then the Amateur Tuning frequency, which is the one you 
actually tune your dial to in USB mode.

Note:  There was a change to one of these channels effective in March of 
2012, however, I am not sure of the change.
5332 kHz & 5330.5 kHz
5348 kHz & 5346.5 kHz
5368 kHz & 5366.5 kHz
5373 kHz & 5371.5 kHz
5405 kHz (common US/UK) & 5403.5 kHz
Amateurs may use USB *only* with a maximum effective radiated power
(ERP) of 50 W. Radiated power must not exceed the equivalent of 50 W PEP 
transmitter  output power into an antenna with a gain of 0 dBd.

40 Meters
Novice and Technician classes:
7.025-7.125 MHz : CW only
General class:
7.025-7.125 MHz : CW, RTTY/Data
7.175-7.300 MHz:: CW, Phone, Image
Advanced class:
7.025-7.125 MHz : CW, RTTY/Data
7.125-7.300 MHz:: CW, Phone, Image
Amateur Extra class:
7.000-7.125 MHz : CW, RTTY/Data
7.125-7.300 MHz:: CW, Phone, Image
Note: Phone and Image modes are permitted between 7.075 and 7.100 MHz for 
FCC licensed stations in ITU Regions 1 and 3 and by FCC licensed stations in 
ITU  Region 2 West of 130 degrees West longitude or South of
20 degrees North latitude. See Sections 97.305(c) and 97.307(f)(11).
Novice and Technician  licensees outside ITU Region 2 may use CW only 
between 7.025 and 7.075 MHz and between 7.100 and 7.125 MHz. 7.200 to
7.300 MHz is not available outside  ITU Region 2. See Section 97.301(e).
These exemptions do not apply to stations in the continental US.

30 Meters
Maximum power, 200 watts PEP. Amateurs must avoid interference to the fixed 
service outside the US.
General, Advanced, Amateur Extra classes:
10.100-10.150 MHz: CW, RTTY/Data

20 Meters
General class:
14.025 -14.150 MHz CW, RTTY/Data
14.225 -14.350 MHz: CW, Phone, Image
Advanced class:
14.025 -14.150 MHz CW, RTTY/Data
14.175 -14.350 MHz: CW, Phone, Image
Amateur Extra class:
14.000 - 14.150 MHz CW, RTTY/Data
14.150 -14.350 MHz: CW, Phone, Image

17 Meters
General, Advanced, Amateur Extra classes:
18.068-18.110 MHz: CW, RTTY/Data
18.110-18.168 MHz: CW, Phone, Image

15 Meters
Novice and Technician classes:
21.025-21.200 MHz: CW Only
General class:
21.025-21.200 MHz: CW, RTTY/Data
21.275-21.450 MHz: CW, Phone, Image
Advanced class:
21.025-21.200 MHz: CW, RTTY/Data
21.225-21.450 MHz: CW, Phone, Image
Amateur Extra class:
21.000-21.200 MHz: CW, RTTY/Data
21.200-21.450 MHz: CW, Phone, Image

12 Meters
General, Advanced, Amateur Extra classes:
24.890-24.930 MHz: CW, RTTY/Data
24.930-24.990 MHz: CW, Phone, Image

10 Meters
Novice and Technician classes:
28.000-28.300 MHz: CW, RTTY/Data--Maximum power 200 watts PEP
28.300-28.500 MHz: CW, Phone--Maximum power 200 watts PEP
General, Advanced, Amateur Extra classes:
28.000-28.300 MHz: CW, RTTY/Data
28.300-29.700 MHz: CW, Phone, Image

6 Meters
All Amateurs except Novices:
50.0-50.1 MHz: CW Only
50.1-54.0 MHz: CW, Phone, Image, MCW, RTTY/Data

2 Meters
All Amateurs except Novices:
144.0-144.1 MHz: CW Only
144.1-148.0 MHz: CW, Phone, Image, MCW, RTTY/Data

1.25 Meters
The FCC has allocated 219-220 MHz to amateur use on a secondary basis.
This allocation is only for fixed digital message forwarding systems 
operated by  all licensees except Novices. Amateur operations must not cause 
interference to, and must accept interference from, primary services in this 
and adjacent  bands. Amateur stations are limited to 50 W PEP output and 100 
kHz bandwidth. Automated Maritime Telecommunications Systems (AMTS) stations 
are the  primary occupants in this band. Amateur stations within 398 miles 
of an AMTS station must notify the station in writing at least 30 days prior 
to  beginning operations. Amateur stations within 50 miles of an AMTS 
station must get permission in writing from the AMTS station before 
beginning operations. ARRL Headquarters maintains a database of AMTS 
stations. The FCC requires that amateur operators provide written 
notification including the  station's geographic location to the ARRL for 
inclusion in a database at least 30 days before beginning operations. See 
Section
97.303(e) of the FCC  Rules.

Novice (Novices are limited to 25 watts PEP output), Technician, General, 
Advanced, Amateur Extra classes:
222.00-225.00 MHz: CW, Phone, Image, MCW, RTTY/Data

70 Centimeters
All Amateurs except Novices:
 420.0-450.0 MHz: CW, Phone, Image, MCW, RTTY/Data

33 Centimeters
All Amateurs except Novices:
902.0-928.0 MHz: CW, Phone, Image, MCW, RTTY/Data

23 Centimeters
Novice class:
1270-1295 MHz: CW, phone, Image, MCW, RTTY/Data (maximum power, 5 watts
PEP)

All Amateurs except Novices:
1240-1300 MHz: CW, Phone, Image, MCW, RTTY/Data

Higher Frequencies:

All modes and licensees (except Novices) are authorized on the following 
bands [FCC Rules, Part 97.301(a)]:

    2300-2310 MHz
    2390-2450 MHz
    3300-3500 MHz
    5650-5925 MHz
    10.0-10.5 GHz
    24.0-24.25 GHz
    47.0-47.2 GHz
    76.0-81.9 GHz*
    119.98-120.02 GHz
    142-149 GHz
    241-250 GHz
    All above 300 GHz

* Amateur operation at 76-77 GHz has been suspended till the FCC can 
determine that interference will not be caused to vehicle radar systems

If this is dificult to read, I apologize as I tryed to compress this so it 
would fit in the body of this e-mail.

Howard #3
----- Original Message ----- 
From: "Eden Kizer" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, July 29, 2012 10:43 AM
Subject: band plan


> Hi, someone said there was an hf band plan for general class in text.
> Can someone give it to me, please?  I am still working on this antenna
> issue, but I plan to get this radio by beginning of September, but want
> to make sure we operate on right bands and have right antenna that will
> work in apt with someone above.
>
> Eden 

ATOM RSS1 RSS2