Nope, it should put out 100 on 2 meters. Remember though, the power
adjustment is separate for HF/6, 2 meters and 440, so make sure the power is
up all the way on 2 meters. Procedure is the same but the 2 meter and 440
settings are independent of anything else.
----- Original Message -----
From: "Tom Brennan" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, December 31, 2011 8:18 AM
Subject: Re: ts2000 on hf?
> Guess I need to get mine looked at, then, cause its putting out 50w on 2m
> and
> 35w on 70cm. Sure thought that's what the namual said to expect.
>
> Tom
>
>
> Tom Brennan KD5VIJ, CCC-A/SLP
> web page http://titan.sfasu.edu/~g_brennantg/sonicpage.html
>
> On Fri, 30 Dec 2011, Michael Thurman wrote:
>
>> Date: Fri, 30 Dec 2011 19:00:05 -0500
>> From: Michael Thurman <[log in to unmask]>
>> Reply-To: For blind ham radio operators <[log in to unmask]>
>> To: [log in to unmask]
>> Subject: Re: ts2000 on hf?
>>
>> you wil not have a problem getting a proper diplexer, or even triplexer =
>> for that matter, most of the good ones give you choices when you oder it
>> =
>> as to connector type, and the N connector for uhf has been pretty much =
>> standard for high end radios for over a decade. also the ts2000 puts out
>> =
>> 100 w on 2 meters, not 50
>>
>> On Dec 21, 2011, at 10:07 AM, Tom Brennan wrote:
>>
>> > Yeah, that's an option. I didn't use it because of the additional =
>> loss it
>> > introduced. Since that radio only puts out 50w or less in the upper =
>> bands I
>> > figured I needed all the help I could get <g>.
>> >=20
>> > Tom
>> >=20
>> >=20
>> > Tom Brennan KD5VIJ, CCC-A/SLP
>> > web page http://titan.sfasu.edu/~g_brennantg/sonicpage.html
>>
|