BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Barbara Lombardi <[log in to unmask]>
Reply To:
Date:
Wed, 7 Dec 2011 19:25:50 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (62 lines)
Yes the 940 was a good radio for noise reduction.   

-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of John Miller
Sent: Wednesday, December 07, 2011 2:23 PM
To: [log in to unmask]
Subject: Re: TS590 noise fighting question

The only radio I can honestly say I ever liked the noise blanker on a high
setting was the TS-940. The 930 isn't too bad, running it at a high setting
does make everything distorted, but I find if the noise blanker will take
out noise, it will do it before I get that high. Other radios they either
don't seem to work at all, or they do but don't run it all that high.
----- Original Message -----
From: "Steve Dresser" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, December 07, 2011 12:37 PM
Subject: Re: TS590 noise fighting question


> Tom,
>
> What you describe is typical of the way noise blankers behave, and I 
> don't know of any way to fix it.  You may also notice that running the 
> noise blanker at that high a setting also introduces distortion.  I 
> have not found noise blankers to be particularly useful, although 
> others may disagree.  I have heard that they work well on the very 
> high-end radios, but I'd have to see it to believe it.
>
> Steve
>
> ----- Original Message -----
> From: "Tom Behler" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, December 07, 2011 11:18
> Subject: TS590 noise fighting question
>
>
>> Hi, all.
>>
>> Well, since interference seems to have re-surfaced as a discussion 
>> topic today, I have a quick question for my fellow TS590 users.
>>
>> As I think I pointed out in a previous post, I can eliminate most of 
>> the interference noise I'm having on 10 meters via the noise blanker II.
>> function on the TS590, if I crank it all the way up to level ten.
>>
>> However, I notice that if there is a strong signal on 10 meters, it 
>> brings the noise back in with it.
>>
>> Obviously, my best solution will be to get rid of the noise source 
>> itself, but perhaps there is a way to counteract this problem with 
>> the TS590.
>>
>> I'd be interested in any thoughts anyone has.
>>
>> In the meantime, the noise war continues here, especially on 10 meters.
>>
>> 73 from Tom Behler:  KB8TYJ
>> 

ATOM RSS1 RSS2