The VS-3 is plug in, there's a little slot with a pot right next to it, that
pot actually adjusts the volume for the VS-3, as I recall, if you have the
radio upside down, with the front facing you, it's on the right hand side a
little back from the front panel but it's been a while since I put one in, I
haven't had that radio in years. I know I did it myself no problem. Someone
else said they're going to send you the same manual I have, if you don't get
it for some reason, let me know and I'll send you mine, it's the same thing
as the other list member said they'd send you.
----- Original Message -----
From: "Tom Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, April 14, 2012 8:44 PM
Subject: Re: Questions on TS570S
> John:
>
> If you could send me the TS570S documentation you have, I'd appreciate it.
> The manual would be great, but if you have a key chart or quick reference
> guide, that would be awesome too.
>
> Regarding the VS3, does it have to be soldered into place, or is it plug
> and
> play?
>
> Tom Behler: KB8TYJ
>
>
>
> ----- Original Message -----
> From: "John Miller" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, April 14, 2012 8:31 PM
> Subject: Re: Questions on TS570S
>
>
>> 570D is 10 through 160, the S model has 6 meters as well. It does need
>> the
>> VS-3 to make it speak and it goes in the bottom of the radio. I have
>> decent
>> documentation for it, I'm still recovering from a major computer failure
>> 2
>> weeks ago but I can send it to you if you'd like. It may be tomorrow
>> night
>> though.
>> ----- Original Message -----
>> From: "Tom Behler" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Saturday, April 14, 2012 8:26 PM
>> Subject: Questions on TS570S
>>
>>
>>> Hello all.
>>>
>>> Well, this afternoon and early evening, we visited with the XYL of the
>>> silent key who I mentioned in my e-mails earlier today.
>>>
>>> It turns out that he does have a TS570S, that is in very good shape, and
>>> I'm
>>> seriously thinking of purchasing it in order to have on hand as a
>>> back-up
>>> HF
>>> rig.
>>>
>>> I do have some questions about the rig, though:
>>>
>>> 1. Does anyone have a clean text copy of the manual that you could send
>>> me?
>>> I'd also appreciate any other documentation that you might have. I
>>> checked
>>> for the manual on icanworkthisthing.com, but found it to be rather hard
>>> to
>>> navigate with Jaws 13.
>>>
>>> Please send anything to:
>>>
>>> [log in to unmask]
>>>
>>> 2. What is the difference between the TS570 S and the TS570 D? The rig
>>> I
>>> checked out today was the 570S.
>>>
>>> 3. Am I correct in saying that the TS570S requires the VS3 voice chip
>>> in
>>> order to provide needed speech screen rdading output? Does anyone have
>>> an
>>> extra VS3 that they would be willing to part with for a fair price?? If
>>> not, I'll order one if I really do decide to purchase the rig.
>>>
>>> Thanks for answering these questions!
>>>
>>> 73 from Tom Behler: KB8TYJ
>>
|
