Sorry all, but I didn't know how to reach the ones on here that wanted this.
Hope I didn't
already post it here.
73
Stan Freberg - Tip Of The Freberg (The Stan Freberg Collection) 1951-1998
D1.zip
(61 MB)
http://www.sendspace.com/file/epqn0e
Stan Freberg - Tip of the Freberg (The Stan Freberg Collection) 1951-1998
D2.zip
(62.4 MB)
http://www.sendspace.com/file/coou9i
Stan Freberg - Tip of the Freberg (The Stan Freberg Collection) 1951-1998
D3.zip
(66.8 MB)
http://www.sendspace.com/file/osaxm6
Stan Freberg - Tip Of The Freberg (The Stan Freberg Collection) 1951-1998
D4.zip
(62.9 MB)
http://www.sendspace.com/file/0uv2ck
----- Original Message -----
From: "Curtis Delzer" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, October 22, 2011 1:01 AM
Subject: Re: TS590 menus A and B, and carrier adjustment.
>O I C that doubles for changing the menu to A, or B. thanks!
>
> Curt
>
>
> W B 6 H E F
>
>
>
> At 04:24 PM 10/19/2011, you wrote:
>>Curt, the third button to the right of the tuning knob, the second row
>>down
>>from the top. push it it will say a, push again b, hold it down it puts
>>both vfos on same qrg. 73
>>Ed K7UC
>>
>>--------------------------------------------------
>>From: "Curtis Delzer" <[log in to unmask]>
>>Sent: Wednesday, October 19, 2011 2:37 PM
>>To: <[log in to unmask]>
>>Subject: Re: TS590 menus A and B, and carrier adjustment.
>>
>> > I thought so, in fact, I wonder why there is a carrier adjustment at
>> > all in SSB. :) Now, my only question is where is this "a/b button you
>> > refer too? thank you!
>> >
>> >
>> > Curt
>> >
>> > W B 6 H E F
>> >
>> >
>> > At 10:25 AM 10/19/2011, you wrote:
>> >>Curt,
>> >>
>> >>The carrier level adjustment applies to AM, not SSB. Regarding the
>> >>menus,
>> >>you switch from Menu A to Menu B by pressing the A/B button when inside
>> >>the
>> >>menus. The radio beeps once when the A menu is selected, and twice
>> >>when
>> >>the
>> >>B menu is selected.
>> >>
>> >>Steve
>> >>
>> >>----- Original Message -----
>> >>From: "Curtis Delzer" <[log in to unmask]>
>> >>To: <[log in to unmask]>
>> >>Sent: Wednesday, October 19, 2011 10:22
>> >>Subject: TS590 menus A and B, and carrier adjustment.
>> >>
>> >>
>> >> > Hi all. I have two confusing issues. On SSB there is a "carrier"
>> >> > adjustment. In the old days it seems to me you want the carrier
>> >> > adjustment as low as it can be made on SSB, so it should be zero,
>> >> > but
>> >> > mine, coming out of the factory, or at default adjustment was 50
>> >> > percent. Why, and where should it be?
>> >> > My other question has to do with the menus. How do we know as blind
>> >> > ops which menu we are using, A, or B? And, how do we access them
>> >> > from the front panel of the rig. I know how to use the ARCP-590
>> >> > software to switch from one or the other of the menus, but I don't
>> >> > know from which I am either operating or even in the ARCP-590
>> >> > software which I am accessing when making changes, just that I am
>> >> > accessing or changing the other.
>> >> > Thanks!
>> >> >
>> >> > Curt
>> >> >
>> >> > W B 6 H E F
>> >> >
|
