O I C that doubles for changing the menu to A, or B. thanks!
Curt
W B 6 H E F
At 04:24 PM 10/19/2011, you wrote:
>Curt, the third button to the right of the tuning knob, the second row down
>from the top. push it it will say a, push again b, hold it down it puts
>both vfos on same qrg. 73
>Ed K7UC
>
>--------------------------------------------------
>From: "Curtis Delzer" <[log in to unmask]>
>Sent: Wednesday, October 19, 2011 2:37 PM
>To: <[log in to unmask]>
>Subject: Re: TS590 menus A and B, and carrier adjustment.
>
> > I thought so, in fact, I wonder why there is a carrier adjustment at
> > all in SSB. :) Now, my only question is where is this "a/b button you
> > refer too? thank you!
> >
> >
> > Curt
> >
> > W B 6 H E F
> >
> >
> > At 10:25 AM 10/19/2011, you wrote:
> >>Curt,
> >>
> >>The carrier level adjustment applies to AM, not SSB. Regarding the menus,
> >>you switch from Menu A to Menu B by pressing the A/B button when inside
> >>the
> >>menus. The radio beeps once when the A menu is selected, and twice when
> >>the
> >>B menu is selected.
> >>
> >>Steve
> >>
> >>----- Original Message -----
> >>From: "Curtis Delzer" <[log in to unmask]>
> >>To: <[log in to unmask]>
> >>Sent: Wednesday, October 19, 2011 10:22
> >>Subject: TS590 menus A and B, and carrier adjustment.
> >>
> >>
> >> > Hi all. I have two confusing issues. On SSB there is a "carrier"
> >> > adjustment. In the old days it seems to me you want the carrier
> >> > adjustment as low as it can be made on SSB, so it should be zero, but
> >> > mine, coming out of the factory, or at default adjustment was 50
> >> > percent. Why, and where should it be?
> >> > My other question has to do with the menus. How do we know as blind
> >> > ops which menu we are using, A, or B? And, how do we access them
> >> > from the front panel of the rig. I know how to use the ARCP-590
> >> > software to switch from one or the other of the menus, but I don't
> >> > know from which I am either operating or even in the ARCP-590
> >> > software which I am accessing when making changes, just that I am
> >> > accessing or changing the other.
> >> > Thanks!
> >> >
> >> > Curt
> >> >
> >> > W B 6 H E F
> >> >
|