Tom,
The rig data should be automatic.
Go to online logging and enter a make believe QSO a couple of times with the
rig on different frequencies or bands.
Save with f12 or control S.
Go to browse log and you should see the entries.
Go to your C: drive and program files and the WSLog folder. Your log is
called myLog.log. Simply delete this file and your test log is gone.
I hope this helps.
73's
Howard #3
----- Original Message -----
From: "Tom Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, December 23, 2011 10:09 PM
Subject: Re: WhiteStick Log Question
> Howard:
>
> I have been working with WhiteStick log here tonight, and I have a few
> questions:
>
> 1. I believe I have the CAT rig interface working between WhiteStick log
> and my Kenwood TS590, but am not sure how to doublecheck that.
>
> Can you tell me how to be sure the rig data is bening entered into the log
> ok?
>
> I assume it's entered in there automatically, isn't it?
>
> 2. How can you view and edit a complete log entry for each contact?
>
> and
>
> 3. How can you delete your current log and start a new one? Right now,
> I'm
> just playing around, but eventually, I'll need to eliminate this fake log,
> and vreate a real one.
>
>
> If anyone else has any words of wisdom regarding how to work with
> WhiteStick
> log, please send them my way too.
>
> 73 from Tom Behler: KB8TYJ
> ----- Original Message -----
> From: "Howard, W A 9 Y B W" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, December 20, 2011 8:39 AM
> Subject: Re: WhiteStick Log Question
>
>
>> Tom,
>>
>> I think you have it.
>>
>> After you modify that first line in the .rig file you are going to use
>> than
>> when the program is launched it will read and use that file.
>>
>> When you launch WS log, you are presented with a list of options, choose
>> "rig Data", fill in the fields for each band you will operate and then
>> this
>> info will be inserted into your log when you enter a new contact into
>> your
>> log.
>>
>> I hope this helps.
>>
>> 73's
>>
>> Howard #3
>>
>> ----- Original Message -----
>> From: "Tom Behler" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Tuesday, December 20, 2011 6:03 AM
>> Subject: Re: WhiteStick Log Question
>>
>>
>>> Howard:
>>>
>>> Maybe I'm making this harder than it needs to be.
>>>
>>> Once I do the editing, will the program file just work with the software
>>> as
>>> is, when I launch it?
>>>
>>> If so, sorry about my last two posts.
>>>
>>> Guess it's good that I'm not trying to be a computer programmer as a way
>>> to
>>> make a living! (grin)
>>>
>>> 73 from Tom Behler: Kb8TYJ
>>>
>>> ----- Original Message -----
>>> From: "Howard, W A 9 Y B W" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Monday, December 19, 2011 11:15 PM
>>> Subject: Re: WhiteStick Log Question
>>>
>>>
>>>> Tom,
>>>>
>>>> I didn't read all the way down in your e-mail. It looks like you
>>>> already
>>>> found what to do. You will need to edit that first line in the
>>>> Kenwood.rig
>>>> file using a text editor. Do not use Word or Wordpad, must be
>>>> something
>>>> like NotePad.
>>>>
>>>> Exactly what is it you are trying to do?
>>>>
>>>> Howard #3
>>>>
>>>> ----- Original Message -----
>>>> From: "Tom Behler" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Monday, December 19, 2011 9:18 PM
>>>> Subject: WhiteStick Log Question
>>>>
>>>>
>>>>> Hi, folks.
>>>>>
>>>>> Well, I believe I successfully installed WhiteStick log on my Windows
>>>>> 7
>>>>> laptop.
>>>>>
>>>>> I didn't think it would work, but the program seems to be there. It
>>>>> seems
>>>>> to
>>>>> function well, and is extremely Jaws friendly.
>>>>>
>>>>> So, thanks to Howard number 3 for posting the link.
>>>>>
>>>>> I do have one question, though.
>>>>>
>>>>> Where do you find the Cat Rig Control set-up in the software?
>>>>>
>>>>> It is clear from the text below in the Instructions folder that you
>>>>> can
>>>>> configure the software to work with your rig, but I can't find where
>>>>> to
>>>>> go
>>>>> to configure things.
>>>>>
>>>>> Here are the instructions. Can anyone help?:
>>>>>
>>>>> CAT RIG CONTROL.
>>>>> CAT rig control will be provided if you change the extension of one of
>>>>> the
>>>>> .RI files
>>>>> provided to .RIG
>>>>> It is important that only one of these files has the extension .RIG
>>>>> When you change frequency or mode on the rig WSLog will update the
>>>>> computer.
>>>>> FT990 users must have revision one point three firmware or higher to
>>>>> function correctly.
>>>>> You may amend line one in the rig file; the first number is the COM
>>>>> port,
>>>>> followed by the baud rate, parity (N), number of data bits and number
>>>>> of
>>>>> stop bits.
>>>>> Alter these if they are not the rig defaults.
>>>>> The com port number must be followed by a colon.
>>>>> A general purpose ICOM rig file is provided, users will need to change
>>>>> the
>>>>> digits
>>>>> marked xx to the address of the rig as supplied in the rig manual.
>>>>> These
>>>>> values
>>>>> are hexadecimal, only use the two digits, ignore the H.
>>>>> A KENWOOD file provides for all Kenwood rigs.
>>>>> Users of Yaesu FT817, FT847, FT857 and FT897 should use the FT8x7
>>>>> file.
>>>>> Users of Yaesu FT450, FT950, FT2000 and FTDX9000 should use the YAESU1
>>>>> file.
>>>>> CAT control is also provided for the TEN-TEC Pegasus rig.
>>>>> The RIG file for that contains one line for the drive and path of the
>>>>> Pegasus software.
>>>>> This is typically C:\PEGASUS\ and the last character MUST be a back
>>>>> slash.
>>>>>
>>>>> 73 from Tom Behler: KB8TYJ
>>>>
>>
|