Subject: | |
From: | |
Reply To: | |
Date: | Wed, 6 Jul 2011 17:28:38 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
John, thank you very much.
Junior Lolley KG4itd
Liberty County Emergency Coordinator
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of John Miller
Sent: Wednesday, July 06, 2011 5:10 PM
To: [log in to unmask]
Subject: Re: 706 mark II g question
When you're on the frequency you want to set the tone for, hit and hold the
button above and slightly left of the lock/voice button until you get the
second beep. That puts you in the menu with power, mic gain and what not,
and it's in there if you tune the control that does memory channels, then to
adjust it you turn the tuning dial. With sighted help is easier but I've
found if you have another receiver tuned to the transmit frequency with tone
squelch on, you can keep it keyed, dummy load or low power preferred, you
can tune through the PL tones while it's keyed and you'll know when you find
it with that other receiver. I don't like doing it that way but have.
----- Original Message -----
From: "Junior Lolley" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, July 06, 2011 4:35 PM
Subject: 706 mark II g question
> Can anyone give me the info of how to set a repeater tone in the 706 mark
> II
> g please.
> I have sighted help.
> Thank you.
>
>
> Junior Lolley KG4itd
> Liberty County Emergency Coordinator
|
|
|