Tom,
While I can't answer all your questions, i would suggest you go back to
the Kenwood download page and get the free radio control program for the
480. Save the radio data to the computer, then when you update
firmware, or have some disaster or screw up, you can just reload all
settings from the computer back to the radio.
I would also confirm your current firmware version and see if later
versions offer anything worthwhile. If it ain't broke, don't fix it.
73, Steve KW3A
On 2/4/2011 10:17 AM, tom behler wrote:
> Hi, all.
>
> Regarding the TS480 firmware upgrade, I have a few more questions:
>
> 1. Once you have done the update, will the VGS1 resume speaking, or do you
> have to re-program the radio to recognize the chip. If so, that would
> require sighted assistance, correct?
>
> 2. Once you do the firmware update, and do the required re-set, am I
> correct in saying that all of your previous menu settings and memory
> channels will be gone? That's not a big problem in my case, since I don't
> have too many of them, but it would be a good thing to know in advance.
>
> and
>
> 3. If someone tries the key combination to find out what firmware version
> you already have, please let me know if the VGS1 announces that. I think
> the key conbination is the mic ptt button, plus the NR key on the control
> head.
>
> 73 from Tom Behler: KB8TYJ
>
> ----- Original Message -----
> From: "Richard Fiorello"<[log in to unmask]>
> To:<[log in to unmask]>
> Sent: Thursday, February 03, 2011 9:18 PM
> Subject: Re: ts480 firmware
>
>
> Hi;
> Thanks Steve, sounds like a nice Friday evening project.
>
> richard
>
> On 2/3/2011 7:12 PM, Steve Forst wrote:
>> Here is a link that gives the firmware history of the 480. There is
>> also a link on this page that will give the key commands to see what
>> your current firmware is. Don't know if the speech gives any readout on
>> this.
>>
>>
>> http://www.kenwood.com/i/products/info/amateur/ts_480/firmware/pop_ts480_e.htm
>> 73, Steve KW3A
>> On 2/3/2011 5:05 PM, Richard Fiorello wrote:
>>> Hello;
>>> Is there a combination that will give the user some indication as to
>>> what version of the firmware is currently installed? I no there was an
>>> update some time ago. Is this an additional update and have folks found
>>> its worth the bother?
>>
>
|
