Thanks very much, Ed.

I'll probably order some when I get the chance here, just to have some on 
hand.

73 from Tom Behler: KB8TYJ

----- Original Message ----- 
From: "Ed Malmgren" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, April 23, 2011 1:37 PM
Subject: Re: Question on LDG TW1 volume control


Tom, from whaat I hear from the Ten-Tec reflector, the best contact cleaner
is ,  eoxit  it comes in spray cans and not sure what else.  I am not sure
but I have heard that it is the only one that Ten-Tec will use.  The web
site is  www.caig.com  I have used it on pots and it works great.  good
luck.  73
Ed  K7UC
----- Original Message ----- 
From: "tom behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, April 23, 2011 6:20 AM
Subject: Question on LDG TW1 volume control


> Hi, folks.
>
> Ok, don't worry, Murphy has not re-visited me, and things are still
> running
> fine here.
>
> However, I have noticed a recurrence of a very minor problem with my LDG
> TW1
> talking watt meter.
>
> Specifically, the volume control once again seems a bit flaky.  In other
> words, as I move it up and down, it cuts out on occasion, and may even do
> it
> sometimes in the middle of a power or SWR reading, making it necessary for
> me to re-adjust the control. ... When the problem first occurred, I used
> some canned air on the volume control, and it seemed to have cleared up
> the
> problem temporarily.
>
> I guess what I'm asking is has anyone else had this problem, and how did
> you
> fix it?
>
> I know that Radio Shack sells a can of some sort of contact cleaner, but
> don't know if it's any good.
>
> Thanks for any thoughts or suggestions, and I look forward to seeing many
> folks on the round table later this afternoon.
>
> I'll be on or near 7.185 MHZ at 4 p.m. Eastern, 2100 Z.
>
> 73 from Tom Behler:  KB8TYJ